Will this 4" adapter work?

[GeoRXT]

I took it off the Yamaha, as I did the 4" flex hose Im going to use, saw it as a nice 90* bend...Will it work, Im not sure if it can handle the heat well? It looks sturdy enough...

[NCHeel]

Thats a really restrictive set up. you've got a 6-8 inch section of 3 inch tube with a 90 degree elbow in it. Buy the adapter that R&D has and attach your hose directly to it.

[GeoRXT]

Im not hyped about paying $50+ for this adapter man....

[shhr]

GEO I used a 3" to 4" silicone 90 degree elbow, then I used 4" black plastic pipe from lowes 9 (I call it drainage pipe) to run up front it comes in 10' sections and one end is smaller and it fit just inside the 4" part of the 90 ( clamp here) I could not belive how easy and cheap (around 20) for the complete set up I am not running a filter

[lafjax]

Thats a really restrictive set up. you've got a 6-8 inch section of 3 inch tube with a 90 degree elbow in it. Buy the adapter that R&D has and attach your hose directly to it.

I agree with Heel but if you don't want to spend the $50 give it a try. You should at least get some improvement over stock. Then by the $50 at a later time, if you are not satisfied. I think it would handle the heat okay.

[GeoRXT]

GEO I used a 3" to 4" silicone 90 degree elbow, then I used 4" black plastic pipe from lowes 9 (I call it drainage pipe) to run up front it comes in 10' sections and one end is smaller and it fit just inside the 4" part of the 90 ( clamp here) I could not belive how easy and cheap (around 20) for the complete set up I am not running a filter

I agree with the 90* reducing elbow, but wouldn't it be kinda the same as I have now?.....I might try the filter rings. The SS filter has different sized ring and I belive there is one 3-4" in there....Maybe I can use that to put it up directly onto the SC....


I want a RUDE CHARGER DAMMIT!

[shhr]

the 90 that I used goes to 4" just after the flange on the SC where the one you have is 3" through the 90 so you have several inches of 3" pipe

I need to take a picture of mine

[GeoRXT]

Where did you get it? Autozone or online?

[lafjax]

Where did you get it? Autozone or online?

Here you go...
http://www.stealthwork.com/reinforce...bow-p-307.html

or get it cheaper on Ebay...

[Ultra/RXP]

Better yet and cheaper.....

http://www.siliconeintakes.com/detai...2d2eb00b493920