Will these mods work/help? Please Advise

[ARNYGOLLOTT3]

Just bought the Riva Rear Air Kit...this will work with the Riva thru hull exhaust right?

It has been determined that I am over propped...especially in South MS extreme heat/humidity... doing 68 gps at 7650 rpms...2005 rxp stage 1 with thru hull...

Will the addition of the RR I/C and the Riva Rear Air Kit plus flow rites...cool things off enough to get 250-300 rpms and a couple mph...

[Green Hulk]

Yes, it works perfectly with the thru hull exhaust.

The intercooler will add lots of RPM's. Don't pitch your prop again until you install all your mods and see where you stand.

[05Limited]

I think your prediction is about dead on. Add a "green" SC impeller, fill the ride plate holes and you'll be 72+ @ 8100 rpm

[ARNYGOLLOTT3]

I was hoping you would 'advise' Jerry...thanks for the input!

What is typical rpm loss for high heat/high humidity? What are you guys seeing out there in these hottest days of summer?

Water temps in upper 80's, air temp 95 plus, and high humidity?

[ARNYGOLLOTT3]

When I upgrade S/C...it will be Riva S3 with 42's...and ride plate has been filled...but needs some minor patching where epoxy has come out...thanks

[sandrock]

hey give me a call i live in bay st. louis i can help you if you need something

[sleeplessnMS]

Arnygollot3, there ya go Sandrock is who I told ya about... Put it this way IN COOL air & water I can pull a 15/20 with the longest AAT shuttle and 80mm nozzle 8560-8580~ RIGHT now I pull the same prop with 83mm nozzle & shortest shuttle 8500.... I'm down about 2 mph even with the adjustments. Give Sandrock a pm he can get ya mph for ya dawg!!!

[ARNYGOLLOTT3]

Thanks sleepnessMS, I have talked to him already ... he offered to help me out, like yourself, Greenhulk.net kicks ASS!