Results 1 to 6 of 6
Thread: SC torx size question
-
07-05-2007, 01:26 PM #1
- Join Date
- Jun 2005
- Location
- Hamilton, Ontario, Canada
- Posts
- 556
SC torx size question
I have a 04 RXP and am replacing the stock 04 SC with a 06 SC. Will the three torx screws to mount the SC to the motor be the same, or are a different length required? I am just not sure of the 06 housing in regards to size difference, as I do not have it yet.
-
07-05-2007, 01:33 PM #2
They are the same length. My ski is a '05 (same S/C as '04) and I bolted up a '06 charger just fine.
-
07-05-2007, 05:52 PM #3
- Join Date
- Jun 2005
- Location
- Hamilton, Ontario, Canada
- Posts
- 556
perfect. Thanks for the reply
-
07-06-2007, 01:05 PM #4
- Join Date
- Jul 2007
- Posts
- 3
06 sc on 04 rxp
I also have 04 rxp and was wondering how much of a performance gain from bolting on an 06 sc?
-
07-06-2007, 01:25 PM #5
No gains to be had. It's a 'updated' shaft, that's all. The gains come when you change out the supercharger impeller.
-
07-06-2007, 09:50 PM #6
- Join Date
- Jun 2005
- Location
- Hamilton, Ontario, Canada
- Posts
- 556
only replacing mine because my original went boom! (bearing failure)
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Stripped SC torx - How do I remove it?
By joeg in forum 4-Tec PerformanceReplies: 28Last Post: 01-24-2017, 08:10 PM -
Xs Ic-stage3 Sc-throttle Size??
By jimjim in forum 4-Tec PerformanceReplies: 16Last Post: 10-16-2007, 06:27 AM -
03 GTX SC, what size allen head on impeller?
By gbest in forum 4-Tec PerformanceReplies: 3Last Post: 07-11-2007, 02:33 PM -
removing supercharger torx size
By codymouse54321 in forum 4-Tec PerformanceReplies: 18Last Post: 07-11-2007, 07:15 AM -
RR SC Impeller install question
By GTXX in forum 4-Tec PerformanceReplies: 12Last Post: 05-12-2007, 09:39 PM
I have recently bought a yamaha gp1200r, my family enjoyed it on the lake...
Gp1200r push start button get the...