Results 1 to 4 of 4
Thread: QSTS Trim Adjustment
-
06-30-2007, 05:52 PM #1
- Join Date
- Jan 2007
- Location
- Virginia
- Posts
- 277
QSTS Trim Adjustment
Did a search but can't find anything. What are the specs are what do you measure to make sure your neutral setting is neutral. Thanks.
-
06-30-2007, 07:23 PM #2
measure from the steering nozzle to the venturi top and bottom with the bars straight and the trim set at neutral. adjust until the measurements are the same.
-
06-30-2007, 09:25 PM #3
- Join Date
- Jan 2007
- Location
- Virginia
- Posts
- 277
I adjusted till I got equal measurements. Is the venturi that ring that sits there that the steering nozzle pivots on?
-
06-30-2007, 10:09 PM #4
- Join Date
- Jan 2007
- Location
- Virginia
- Posts
- 277
forget it - I just went back out and looked. Nozzle is closer than trim ring. thanks.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
When to use the trim adjustment?
By crvtt771 in forum Yamaha PWC Performance (4-stroke)Replies: 1Last Post: 06-03-2012, 08:00 PM -
WTB 2008- 2010 SHO,FZ or FXHO QSTS Trim Cables
By KamikazeGPR in forum Yamaha ClassifiedsReplies: 1Last Post: 09-07-2010, 08:37 PM -
Trim adjustment??
By redzr2s10 in forum Kawasaki PWC Performance (4-stroke)Replies: 12Last Post: 07-14-2008, 01:43 PM -
Trim adjustment on GPR 1300
By shooter98xpl in forum Yamaha PWC Performance (2-stroke)Replies: 17Last Post: 02-19-2008, 02:08 AM -
Trim adjustment on GPR 1300
By shooter98xpl in forum Yamaha How To & FAQsReplies: 11Last Post: 02-18-2008, 10:14 AM
bought a used ecu. the ski fired right up.
2008 FX SHO - No Start - No...