Results 1 to 7 of 7
Thread: GTX Fireing Order?
-
06-30-2007, 05:32 PM #1
- Join Date
- Jun 2007
- Posts
- 10
GTX Fireing Order?
Is there any one that can answer my question below?
What is the cylinder firing order for the GTX Limited 07?
Bermy GuyLast edited by bermy guy; 06-30-2007 at 06:39 PM. Reason: Re-asking question
-
06-30-2007, 08:14 PM #2
- Join Date
- Jul 2005
- Location
- euxton nr chorley lancashire, england
- Posts
- 1,500
- +1
- 2
-
06-30-2007, 08:16 PM #3
- Join Date
- Jul 2005
- Location
- euxton nr chorley lancashire, england
- Posts
- 1,500
- +1
- 2
-
06-30-2007, 11:00 PM #4
- Join Date
- Jun 2007
- Posts
- 10
-
07-01-2007, 10:40 AM #5
if no 1 knows the order, u can find out which cyl.follows which by removing the valve cover, rotate the motor, when on compression stroke, piston on the way up, all 4 valves closed. BTW, if u makin' that thing outta stainless equal-length water-jacketed tubes, I want 1
-
07-01-2007, 11:01 AM #6
i think it fires down the line... 3-2-1...
#3 is the FRONT cylinder in 4-tecs
i'll let you know in a couple minutes maybe ... just tying up a few loose ends on my new motor before i fire it up...
wouldn't pulling the fuel rail and cranking the motor let me know the exact firing sequence also by looking at the fuel injectors spraying fuel into the open air?
-
07-01-2007, 11:29 AM #7
- Join Date
- Jun 2007
- Posts
- 10
Sea Doo Header
I find it hard to belive that all other motor sports using a 4cycle engine use separte header pipes except PWCs.
I understand the heat issue but there are ways around that. I will be using a second hand to work on this project. I have the 07 GTX LTD and it is still under warranty. So I can look but no Touchy Touch!!
I will keep you posted.
Do you know of any one using the Land&Sea PWC Dyno?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
ingition coils firing order question
By andy95'slx780 in forum Polaris Open DiscussionReplies: 2Last Post: 05-15-2010, 07:38 AM -
firing order 4tec
By Louis914 in forum 4-Tec PerformanceReplies: 3Last Post: 02-02-2009, 09:43 AM -
GTX Firing problems???
By vegasvec in forum 2-Stroke PerformanceReplies: 0Last Post: 08-14-2008, 09:31 AM -
GTX Firing Problem
By Bruins in forum 2-Stroke PerformanceReplies: 1Last Post: 06-18-2007, 11:57 AM -
EMS GTX Fired Up
By Red Devil in forum 4-Tec PerformanceReplies: 27Last Post: 01-06-2007, 10:52 PM
What does that tell us? Thanks
Yamaha Head casting question