Results 1 to 6 of 6
Thread: oil system bleed
-
06-29-2007, 02:29 AM #1
- Join Date
- May 2007
- Location
- sonoma county
- Posts
- 17
oil system bleed
I'm bleeding the oil system of my 97 gti 2 stroke. on the inline oil filter there is an air bubble that wont come out. its been bleeding for over 5 min. i moved it around banged it etc any ideas? the arrow in the filter is pointing towards the engine is that right, any help greatly appreceiated
-
06-29-2007, 06:56 PM #2
try to move the oil lines around so the bubble can rise to the oil tank.
-
06-29-2007, 08:30 PM #3
- Join Date
- May 2007
- Location
- sonoma county
- Posts
- 17
thanks i'll try that
-
06-30-2007, 06:47 PM #4
- Join Date
- Jul 2006
- Location
- upstate NY
- Posts
- 289
- +1
- 1
I pull the airbleed screw and have someone blow into the oil tank and it will push the air bubble out.
-
07-06-2007, 03:54 PM #5
- Join Date
- May 2007
- Location
- sonoma county
- Posts
- 17
thanks it worked!!
-
07-09-2007, 07:15 AM #6
you should replace the filter
i had a similar problem and found that the filter was not flowing enough and would not let the bubble pass, when i replades it the bubble went through it
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
08 and up supercharger oiling system retrofit.
By 01xdime in forum 4-Tec PerformanceReplies: 116Last Post: 07-10-2014, 10:30 PM -
Oil Line Bleeding?
By pitt79 in forum Polaris Open DiscussionReplies: 5Last Post: 11-24-2009, 07:56 PM -
Oil Filter Replacement - System Bleed Required?
By jchale in forum 2-Stroke PerformanceReplies: 3Last Post: 09-18-2009, 07:21 AM -
upgrading C/S oiling system to a 08 spec's
By vspec1 in forum 4-Tec PerformanceReplies: 1Last Post: 08-14-2009, 02:02 PM -
Oiling system test?
By gearheadengineering in forum Polaris Open DiscussionReplies: 4Last Post: 07-09-2009, 05:41 PM
Howdy folks... So I have a bit of a Frankenstein jet ski. It's a 2007...
Frankenstein Exhaust overheating...