Results 1 to 10 of 17
Thread: SC Washers-how much $ for metal
-
06-27-2007, 10:23 PM #1
- Join Date
- Jun 2007
- Posts
- 71
SC Washers-how much $ for metal
If I buy a Sea-Doo I have been hearing all types of SC washer problems because of ceramic.How much does it cost to get them changed to metal right away?Thanks.
-
06-27-2007, 10:25 PM #2
-
06-27-2007, 10:25 PM #3
Metal washers are $90
http://www.4-tecperformance.com/inde...roducts_id=390
Or $109.95 depending on brand
http://www.4-tecperformance.com/inde...roducts_id=381
You can do them yourself or send your SC to me and i charge $50
-
06-27-2007, 10:31 PM #4
- Join Date
- Jun 2007
- Posts
- 71
90 bucks a washer ouch...do you know the proper way to break them in so they most likely won't break because i don't do hard riding like dohnuts,full throttle all the time,jumping waves....lmk thanks
-
06-27-2007, 10:35 PM #5
No, $90 for the pair of the washers, or $109.95 per pair. There is no break in on these. Install them and ride your ski like you stole it
-
06-27-2007, 10:36 PM #6
Its 90 for the pair. Expensive? yes. worth it? abso-frikkin-lutely!
If you mean break in for metals. you dont have to worry. If you are talking about the factory ceramics, the failure of those washers is truly random. It happens from 2 hours in, to never. It is a gamble not worth taking though.
-
06-27-2007, 10:38 PM #7
- Join Date
- Jun 2007
- Posts
- 71
lol thank god 90 a piece ouch....and how many do you need?
-
06-27-2007, 10:40 PM #8
They are $90 for the pair (2 of them)
All you need is one pair
-
06-28-2007, 06:15 AM #9
If $90 is too expensive for the washers buy the non-SC Sea Doo Watercraft.
-
06-28-2007, 09:37 AM #10
$90 for the set.....or one month without a ski cuz the ceramic ones broke inside and caused A LOT of damage?...
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
how much for a supercharger replace washers.
By melloyellow-RXP in forum 4-Tec PerformanceReplies: 3Last Post: 05-28-2010, 02:39 PM -
How much for insurence for 250x
By noriu69 in forum Kawasaki PWC Performance (4-stroke)Replies: 1Last Post: 03-06-2007, 11:47 AM -
How much for PWC battery?
By gorilla03 in forum Polaris Open DiscussionReplies: 32Last Post: 01-07-2007, 07:35 PM -
How much for RXP in So. Fla...?
By GeoRXT in forum Sea Doo Open DiscussionReplies: 8Last Post: 10-12-2006, 09:28 PM -
How much for average Jetworks kit install?
By Yellow93 in forum Yamaha PWC Performance (2-stroke)Replies: 14Last Post: 04-27-2006, 06:50 PM
Thank you in advance for any help. I made a promise to the niece that I...
Just can't figure it out.......No...