Results 1 to 3 of 3
-
06-27-2007, 08:31 AM #1
- Join Date
- Jun 2007
- Location
- Little Elm, TX
- Posts
- 91
What to use to cap off the carb fuel lines inlets?
Did a search, and find some pics, but wanted more info.
For the triple outlet pump upgrade.
Can I use vacuum caps and clamp them?
Other suggestions, please.
TIA,
Matt
-
06-27-2007, 08:40 AM #2
I like to use fuel injection hose, new clamps and a plug out of the Keihin primer kits.
Anybody that carries the primer kit or deals with Hot Products will have the plug.
-
06-27-2007, 04:25 PM #3
- Join Date
- Sep 2006
- Posts
- 198
Short pieces of original rummer fuel line, stainless steel 1/4" worm clamps and small diameter bolts with the threads cut off.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
what do i need to change in the carbs to make my Air filters work correctly on my spx
By Joe Stang in forum 2-Stroke PerformanceReplies: 2Last Post: 08-06-2008, 08:04 AM -
what to use for remove silicone to come off the bottom of the ski
By Extrememotors in forum 4-Tec PerformanceReplies: 4Last Post: 05-16-2008, 09:45 PM -
Damm hard to stay off the Limiter when wave jumping
By BOOSTED in forum 4-Tec PerformanceReplies: 21Last Post: 12-01-2006, 09:54 PM -
For those running 4" intake. What to do with the breather
By Hecyan in forum 4-Tec PerformanceReplies: 3Last Post: 07-28-2006, 07:44 PM -
How to take off the front part of the OEM intake.....
By GeoRXT in forum 4-Tec PerformanceReplies: 34Last Post: 03-07-2006, 04:54 PM
I always roll the stem on a piece of flat bar or chuck it in a drill and...
Finally rebuilt (300 conversion)...