Replacing the anodes - how much should be remaining?

[AlexZ]

Hi @ll!
I did just the winterization of my RXT-X 2019 and was wondering when the anodes should be replaced.
In the manual there is only 1 sentence about it: you should replace them when more than 50% is gone.

So I'm not sure what 50% means, are the "coin" anodes completely made of zinc? So when the diameter is only 50% it should be replaced or is this messured wrong?

Attached you will find 2 of the used anodes, which I have replaced. Clean off the "lime" or whatever that was.



Regards Alex

[tiderider]

This is the 4tec performance section. Try the Seadoo open discussion.

[1tommygunner1927]

This is the 4tec performance section. Try the Seadoo open discussion.

That horse has left the barn many years a go!

[AlexZ]

This is the 4tec performance section. Try the Seadoo open discussion.

Thanks for moving my post/question into the right category

[tiderider]

Hi @ll!
I did just the winterization of my RXT-X 2019 and was wondering when the anodes should be replaced.
In the manual there is only 1 sentence about it: you should replace them when more than 50% is gone.

So I'm not sure what 50% means, are the "coin" anodes completely made of zinc? So when the diameter is only 50% it should be replaced or is this messured wrong?

Attached you will find 2 of the used anodes, which I have replaced. Clean off the "lime" or whatever that was.



Regards Alex

They are time for you to replace them.