which intake grate

[slow06gpr]

looking to buy an intake grate, i was wondering which one to buy for added top end speed on my gp 1300r .. and where would be the best place to buy it at, i already have jims rideplate and pump seal kit,, i was looking to do it all at once to save some time.\

just worried about the intake grate because everybody seems to have them breaking on them
thanks.....

[jeffsntx]

R&D 1200 grate is the way to go for a reliable rec ski grate. The 800 grates are the ones known for breaking.

[slow06gpr]

do the intake grates all bolt up so the 1200 grate will bolt right up?

[jeffsntx]

Yes, that is correct.

[slow06gpr]

thank you

[porksword]

look at the top of the links section to the left of this post and you will see the online store that supports this forum.

[Mr Bill]

Jerry doesn't carry the 800 grate

[Purple Haze]

Is the 800 grate dangerous without modifying? Just purchased one at the end of season last year. I'll take mine off, if that is the case.

[Chrisrokc]

It can crack. Just pay attention to the 800 grate and you will be fine most likely.

[porksword]

Is the 800 grate dangerous without modifying? Just purchased one at the end of season last year. I'll take mine off, if that is the case.

Its actually more dangerous (with) modifying. As chrisrokc said, just take a look at it evey now and then. But dont worry about it like its going to happen. There are ALOT of 800 grates out there that has not had any problems so just be advised it "could" but dont dwell on it.

With my ski, I look everything over pretty good before I leave the house. If everything seems ok I dont give it another thought until next time.


You can get the 800 grate from carl at Island racing.