Results 1 to 10 of 10
Thread: OPAS Removal
-
06-23-2007, 09:25 PM #1
OPAS Removal
So. You're supposed to "push the rubber seals into the hull".. Then what? You just leave that rubber accordion looking thing chillin' on the inside of the hull?
-
06-23-2007, 09:39 PM #2
I pulled mine out. just pull it out the OPAS hole
-
06-23-2007, 09:59 PM #3
Ref. #10, you just pull it out? It's glued to the pump support..
-
06-23-2007, 10:04 PM #4
Pull really hard, it will come out.
-
06-23-2007, 10:04 PM #5
-
06-23-2007, 10:08 PM #6
I pulled mine out. Like Red devil said, you need to pull really hard. If I remember correctly, I also sprayed some WD-40 on them to make them slide out a lot easier. You may also want to add a little back and forth twist when you are pulling them out.
-
06-23-2007, 10:15 PM #7
-
06-23-2007, 10:51 PM #8
Alright guys, here's where I officially admit to the world I'm mentally retarded. I think ya'll were thinkin' I was talking about removing the metal rod?? The rubber hose piece came right off after I loosened the "plastic rod grommet" on each side. No pulling involved at all. I didn't realize it was that easy because I didn't print out the pictures to look at while removing the OPAS.
-
06-24-2007, 09:49 AM #9
-
06-24-2007, 11:43 AM #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
OPAS Removal Kit,RXP or Race Engineering Pro OPAS Block Off's for RXP
By LAB69 in forum 4-Tec PerformanceReplies: 11Last Post: 01-02-2019, 05:05 PM -
OPAS removal
By wavehummer in forum 4-Tec PerformanceReplies: 5Last Post: 05-15-2007, 08:24 PM -
OPAS Removal Kits Which one????
By JimC in forum 4-Tec PerformanceReplies: 14Last Post: 05-09-2007, 02:32 PM -
OPAS Removed, What sponsons are you using?
By ramnj in forum Sea Doo Open DiscussionReplies: 25Last Post: 04-09-2006, 09:48 PM -
opas removal
By TroyRXP15 in forum 4-Tec PerformanceReplies: 1Last Post: 07-28-2005, 05:33 PM
The photo appears to be the factory configuration. That is an inline...
Leak Below Oil Tank (not the neck)...