Results 1 to 2 of 2
  1. #1

    Join Date
    Sep 2021
    Posts
    13

    Opinion on Ft Cyl Condition, Chime in w/ ur thoughts....

    This is the MAG cyl condition pics. PV dropped in and slightly hammered the piston. Still had compression but was ~15psi lower than PTO jug. Caught it before major damage. Cylinders looks like no liner, so are the originals w/ 85hrs on them.

    Thoughts on the inside cyl condition ? Should they be bored out ? Or do you think I can just replace the pistons/rings ?
    Maybe I'm nit picking this too much... Not sure how well the pic resolution will turn out.

    Will post the PTO side after this post.

    Thanks
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	P20211016_114354.jpg 
Views:	11 
Size:	87.2 KB 
ID:	479644   Click image for larger version. 

Name:	P20211016_114437.jpg 
Views:	7 
Size:	73.0 KB 
ID:	479645   Click image for larger version. 

Name:	PP20211016_115526.jpg 
Views:	11 
Size:	48.8 KB 
ID:	479646   Click image for larger version. 

Name:	PP20211016_115652.jpg 
Views:	9 
Size:	45.4 KB 
ID:	479647   Click image for larger version. 

Name:	PP20211016_115745.jpg 
Views:	8 
Size:	44.8 KB 
ID:	479648   Click image for larger version. 

Name:	PP20211016_115748.jpg 
Views:	8 
Size:	44.7 KB 
ID:	479650  



  2. #2

    Join Date
    Sep 2021
    Posts
    13

    PTO Jugs

    This is the PTO Jug.
    Same story as above.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	A20211016_115044.jpg 
Views:	8 
Size:	54.6 KB 
ID:	479651   Click image for larger version. 

Name:	A20211016_115301.jpg 
Views:	7 
Size:	56.8 KB 
ID:	479652  

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2007 Gpr won't run on cyl 3 but will on both cyl 1 and 2
    By zakre in forum Yamaha PWC Performance (2-stroke)
    Replies: 25
    Last Post: 07-22-2013, 09:09 PM
  2. Anyone actually installed a 3 cyl Domestic in a 2 cyl hull? (not a Hurricane)
    By ghostinstallations in forum Polaris Open Discussion
    Replies: 2
    Last Post: 03-26-2013, 08:45 AM
  3. Opinion on piston condition?
    By Muldoon in forum 2-Stroke Performance
    Replies: 4
    Last Post: 05-27-2011, 12:52 AM
  4. Cost Comparison: Buy OEM used 66V cyl+ piston, or have my cyl resleeved?
    By Jolly Roger in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 05-08-2010, 05:11 PM
  5. WTB Looking for used cyl in good condition
    By West Palm GPR in forum Yamaha Classifieds
    Replies: 2
    Last Post: 09-27-2009, 08:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •