Results 1 to 6 of 6
Thread: RX DI 2002 Problems
-
06-23-2007, 03:29 AM #1
RX DI 2002 Problems
My buddy had a problem with his RX DI 2002.
The top two bolts coming off his exhaust pipe always break. It has been something that happens all the time. Is there a fix for this? The top of the bolt breaks and the washer falls off.
Also, what are the GPS numbers people are getting out of these skis? We GPS'd his at 59mph.
Any input regarding the problem or things we should do would be great.
-
06-23-2007, 04:32 AM #2
- Join Date
- Jun 2007
- Posts
- 198
- +1
- 2
tell him to check his motor mounts ASAP!!
-
06-23-2007, 04:34 AM #3
-
06-24-2007, 05:49 AM #4
- Join Date
- Jun 2007
- Posts
- 198
- +1
- 2
Try and pick up the motor for the exhaust pipe. See if the motor will move when you try and pull it from wherever. Something is NOT right there.
-
06-24-2007, 11:48 AM #5
Also typical when you attach and tighten the front pipe mount before torquing the manifold/pipe bolts....
-
06-24-2007, 08:17 PM #6
Well the motor is in there good. Not moving at all even if I pull on it. So the motor mounts are good.
He has taken it to the dealer before to be fixed and they seemed like it was a normal problem. The only problem with this is they charge him every time!Last edited by Chrisrokc; 07-10-2007 at 08:25 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
2002 rx di cranking problem
By jetski2000 in forum 2-Stroke PerformanceReplies: 11Last Post: 05-12-2015, 10:21 PM -
RX DI starter problem
By rxp127 in forum 2-Stroke PerformanceReplies: 3Last Post: 04-08-2014, 10:35 AM -
2000 Seadoo RX DI performance problems
By jcahl in forum Sea Doo Open DiscussionReplies: 0Last Post: 09-12-2013, 07:02 AM -
RX DI -2002 problems, first wont rev, now wont start , pops injector fuse
By Crille_B in forum 2-Stroke PerformanceReplies: 2Last Post: 06-26-2013, 02:22 AM -
2002 Rx Di
By jetbert in forum 2-Stroke PerformanceReplies: 0Last Post: 06-23-2007, 09:40 PM
Thank you in advance for any help. I made a promise to the niece that I...
Just can't figure it out.......No...