Results 1 to 2 of 2
  1. #1

    Join Date
    Sep 2021
    Location
    Minnesota
    Posts
    1

    MSX 150 No start

    Good morning, I recently acquired a non running MSX150. I installed a new battery and it cranks over just fine but wont fire. The Fuel pump primes, with the lanyard attached and the start button pressed. battery voltage its good maintaining 11.3 while cranking. But my display will not light up until I press the blue button. I bypassed the SIFB with a paper clip (paperclip purple jumped to blue/white) and still have the same condition. I checked the engine speed sensor for corrosion. The connection was clean and the oring looked good, still cleaned with electrical cleaner and added some dielectric grease to the plug. So what I've come up with so far is the ecu is not waking up like its supposed to, also leading to my no spark condition. All the fuses are good in the three black plugs by the ecm. Some insight would be greatly appreciated.

    Thanks
    Cole


    Also I have no sound from the ETB when trying to get things to power up.
    Last edited by DieselOG28; 09-12-2021 at 01:10 PM.

  2. #2
    ripcuda's Avatar
    Join Date
    May 2010
    Location
    Newman Lake, WA
    Posts
    2,643
    +1
    213
    Welcome to GH!

    Did you check all the fuses? (2 separate 3-fuse packs)

    Also check your main relay (the brown box beside the ECU in the rear)... it may be faulty. This is where the ECU (as well as coils and injectors) gets its power.

    Your description does sound like the ECU is not powering up. And you ruled out the SIFB with the paperclip bypass.

    Cheers!


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2004 MSX 150 No Start
    By jakefb16 in forum MSX/Matrix
    Replies: 11
    Last Post: 06-11-2020, 10:32 PM
  2. MSX 150 No Start Issue. No Spark
    By synergy141 in forum MSX/Matrix
    Replies: 4
    Last Post: 08-13-2014, 05:54 PM
  3. MSX 150 Wont start in water
    By Jpac in forum MSX/Matrix
    Replies: 9
    Last Post: 02-11-2013, 07:27 PM
  4. MSX 150 no start after head gasket.
    By jewraffe in forum MSX/Matrix
    Replies: 12
    Last Post: 08-22-2009, 05:40 PM
  5. MSX 150 Will not start on angle
    By rcsscraig in forum MSX/Matrix
    Replies: 11
    Last Post: 07-28-2009, 11:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •