No Spark

[fastkaz]

i have a 2001 gp1200r...i change the starter replay because it had blew..and now im not gettin anyspark from the sparkplugs. what can b the problem?

[Duke]

I would pull the box back apart and make sure all the grounds were put back on the post. I think there are at least 3 or 4 on the one mount.

[jeffsntx]

Also be sure that you plugged the temp sensors back in. If I'm not mistaken the water temp sensor not being plugged in will keep it from firing. Would someone verify this?

[Duke]

Also be sure that you plugged the temp sensors back in. If I'm not mistaken the water temp sensor not being plugged in will keep it from firing. Would someone verify this?

It won't do anything but set off the buzzer on an 01. Not even turn the starter over.

[fastkaz]

my sensor is in alsot.yeh i kno about that its tru

[Smitty]

Unplug the kill switch and see if you get a spark. The plug is located under the front bucket, trace it from the steering column. They go bad sometimes, that will keep you from getting a spark.