Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1

    Join Date
    Jul 2021
    Posts
    10

    Sea Doo Rxt 215 2006 Oil warning P1520

    Hello,
    Sea Doo RXT 215 supercharged 2006
    I am geting oil warning and code P1520 after 2500rpm with non stop beep and limp mode.


    Things i tried to solve this problem but non of them helped:
    1. Oil level is good
    2. New oil preassure switch 420856533
    3. Tried to ground oil preassure switch
    4. Tested wiring between oil preassure switch and ecm
    5. Measured oil preasure 55-90 PSI

    video:
    <font color="#141414"><span style="font-family: &amp;amp">


    Any sugestions please?
    Last edited by Pro; 07-29-2021 at 05:22 PM.

  2. #2
    Wrong oil pressure switch 420856532


  3. #3

    Join Date
    Jul 2021
    Posts
    10
    Are they not the same? as far as i know 420856533 is updated one and this was given by the Sea Doo dealer at the shop


  4. #4
    Quote Originally Posted by Pro View Post
    Are they not the same? as far as i know 420856533 is updated one and this was given by the Sea Doo dealer at the shop


    This Sea-Doo 420856533 Oil Pressure Switch fits the following models and components:
    Sea-Doo 2012 GTR 215 Engine Block
    Sea-Doo 2012 RXT 260 (RS), 2012 (17CA, 17CB) Engine Block
    Sea-Doo 2012 RXT-X 260 & RS Engine Block
    Sea-Doo 2013 GTR 215 Engine Block
    Sea-Doo 2014 GTX LTD 215 Engine Block
    Sea-Doo 2014 GTI SE 130 Engine Block
    Sea-Doo 2012 WAKE PRO 215 (26CA, 26CB) Engine Block
    Sea-Doo 2012 GTX 215, 2012 (42CA, 42CB) Engine Block
    Sea-Doo 2012 GTI SE 130, 2012 (24CA, 24CB, 24CC) Engine Block
    Sea-Doo 2013 WAKE PRO 215 Engine Block
    Sea-Doo 2013 GTS 130 & RENTAL Engine Block
    Sea-Doo 2013 GTI SE 155 Engine Block
    Sea-Doo 2013 GTI 130 Engine Block
    Sea-Doo 2014 GTX 155 Engine Block
    Sea-Doo 2014 GTI LTD 155 Engine Block
    Sea-Doo 2012 GTS 130 & RENTAL 99, 2012 (43CA, 43CB, 25CB) Engine Block
    Sea-Doo 2012 RXP-X 260 & RS Engine Block
    Sea-Doo 2012 GTX LTD IS 260, 2012 (18CA, 18CB) Engine Block
    Sea-Doo 2012 RXT-X aS 260 & RS Engine Block
    Sea-Doo 2013 WAKE 155 Engine Block
    Sea-Doo 2013 GTI SE 130 Engine Block
    Sea-Doo 2013 GTX 155 Engine Block
    Sea-Doo 2013 GTX 215 Engine Block
    Sea-Doo 2014 WAKE PRO 215 Engine Block
    Sea-Doo 2014 GTX S 155 Engine Block
    Sea-Doo 2014 GTS 130 & RENTAL Engine Block
    Sea-Doo 2014 GTR 215 Engine Block
    Sea-Doo 2014 GTI 130 Engine Block
    Sea-Doo 2012 RXT 260 (IS) Engine Block
    Sea-Doo 2012 WAKE PRO 215 Engine Block
    Sea-Doo 2013 GTX S 155 Engine Block
    Sea-Doo 2013 GTI LTD 155 Engine Block
    Sea-Doo 2014 WAKE 155 Engine Block
    Sea-Doo 2012 GTI 130, 2012 (23CA, 23CB) Engine Block
    Sea-Doo 2014 GTI SE 155 Engine Block
    Sea-Doo 2014 RXP-X 260 & RS Engine Block 1
    Sea-Doo 2013 GTX LTD IS 260 Engine Block 1
    Sea-Doo 2014 GTX LTD IS 260 Engine Block 1
    Sea-Doo 2013 RXT 260 Engine Block 1
    Sea-Doo 2013 RXP-X 260 & RS Engine Block 1
    Sea-Doo 2013 RXT-X 260 & RS Engine Block 1
    Sea-Doo 2014 RXT-X 260 & RS Engine Block 1
    Sea-Doo 2014 RXT 260 & RS Engine Block 1
    Sea-Doo 2013 RXT 260 & RS Engine Block 1
    Sea-Doo 2012 GTX S 155 Engine Block 1_GTX S 155
    Sea-Doo 2012 GTX 155, 2012 (38CS, 38CR) Engine Block 1_GTX S 155
    Sea-Doo 2014 RXT-X aS 260 & RS Engine Block 2
    Sea-Doo 2013 RXT-X aS 260 & RS Engine Block 2
    Sea-Doo 2012 WAKE 155, 2012 (35CA, 35CB) Engine Block 2_Sea-Doo
    Sea-Doo 2012 GTI SE 155, 2012 (30CA, 30CB) Engine Block 2_Sea-Doo
    Sea-Doo 2012 GTI LTD 155, 2012 (39CA, 39CB) Engine Block 2_Sea-Doo
    Sea-Doo 2012 GTX 155, 2012 (38CA, 38CB) Engine Block 2_Sea-Doo

  5. #5

    Join Date
    Jul 2021
    Posts
    10
    Also, are these OPS sensors works only as a switch or it also checks for high preassure?

  6. #6
    Quote Originally Posted by Pro View Post
    Also, are these OPS sensors works only as a switch or it also checks for high preassure?

    They only check for low oil pressure your oil pressure reading was good book calls for 65 to 90 psi cold at idle.

  7. #7

    Join Date
    Jul 2021
    Posts
    10
    So in this case issue remains, cause i tried to ground OPS after engine start, also checked when engine starts OPS switch is open (normaly closed) which means there should be no warning

  8. #8
    The difference in the ops is that one is normally closed "grounded" and the other is open "not grounded" So the ski is looking for ground at idle then as oil pressure rises to around 3500 rpm it should change. So you should only ground the wire at 3500 rpm and it should not post a code.

  9. #9

    Join Date
    Jul 2021
    Posts
    10
    So just to confirm OPS 420856532 is normaly open (not grounded)? and OPS 420856533 is normaly closed(grounded).

  10. #10
    Correct

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS 2006 Sea Doo Rxt 215 Supercharged W/ 2 place Trailer
    By dmeyer07 in forum Sea Doo 4Tec Skis
    Replies: 0
    Last Post: 10-14-2018, 01:50 PM
  2. RIVA Sea-Doo Rear Exhaust Kit 255/215 on 2006 GTX ltd 215
    By Mobius101 in forum 4-Tec Performance
    Replies: 3
    Last Post: 03-23-2017, 09:06 PM
  3. Overheating problem - Sea doo rxt 215 2006.
    By Amirhamud47 in forum 4-Tec Performance
    Replies: 1
    Last Post: 02-07-2017, 09:36 AM
  4. Sea doo rxt 215 2006 overhearing.
    By Amirhamud47 in forum 4-Tec Performance
    Replies: 17
    Last Post: 01-20-2017, 02:06 PM
  5. 2009 Sea-Doo WakePro 215 12V Hi Warning on LCD
    By wafer71 in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 01-20-2014, 03:32 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •