Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1

    2010 gtx starts but in limp mode. What's next

    2010 gtx 155

    P0523 engine code.....I read that it's the oil pressure sensor .would this cause limp mode?


    Starts right up makes loud rumble for few seconds then idles fine...

    Stuck in limp mode...what's next.....


    70 hours

    175 175 180 compression ..so that's good.

    Shop put in new

    Wear ring and impeller

    Timing chain

    Tensioner

    Oil change kit x2

    Gasket set

    Head bolts

    Chain guide

    Spark plugs

    Left hand fixing plate and right hand.


    What's next step ????

    U guys want a video?

  2. #2
    Next step is oil sensor I'll go get one tomorrow

  3. #3
    Is there a way to test oil pressure?

  4. #4
    tiderider's Avatar
    Join Date
    Oct 2018
    Location
    Usa
    Posts
    1,097
    +1
    72
    Yes, you can install a gauge on the cylinder head, near the main cooling hose coming off it. There is a 1/4" threaded cap there.

  5. #5
    I was just reading on that thanks. The plug looks alot bigger the quarter inch...more like 3/4

  6. #6
    ptscon's Avatar
    Join Date
    Jul 2013
    Location
    Toronto
    Posts
    4,775
    +1
    1,029
    Dear god, time to find a new shop dude. The error code clearly tells you what the issue is and nothing they touched is related to it. There's an oil pressure switch which tells the ECU if a specific oil pressure has been reached. If that switch is not triggered, by oil pressure, than ECU goes into limp mode as you're experiencing.

    They need to look at the oil pressure switch which is located at the base of the oil filter housing towards the intake manifold, you can replace it yourself. If it's not the switch than the oil pressure regulator has to be looked at, it's located at the bottom of the PTO cover.

  7. #7
    I'm getting the oil pressure sensor tomorrow hopefully and replacing it my self


  8. #8
    Dude I bought it from jump started it with a running truck?

    Is the ecu fried?

  9. #9
    Fixed the codes.

    By changing the oil pressure sensor and earned the map sensor.

    Took it out today ran for 45 min no problems

  10. +1 by:


  11. #10
    Congratulations on the repair. Wish mine was that easy.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 2
    Last Post: 06-25-2019, 06:34 PM
  2. 2006 GTX SC acts like its stuck in limp mode.
    By corndogjim in forum Sea Doo Open Discussion
    Replies: 0
    Last Post: 08-13-2017, 11:59 PM
  3. '02 GTX RFI in some sort of Limp Mode
    By Drunkenaviator in forum 2-Stroke Performance
    Replies: 4
    Last Post: 09-07-2015, 08:30 PM
  4. GTX LTD 2010 going to limp mode after a jump
    By jake555 in forum 4-Tec Performance
    Replies: 4
    Last Post: 06-28-2012, 09:58 PM
  5. 03 GTX Sc goes into limp home mode
    By porschemaniac in forum 4-Tec Performance
    Replies: 1
    Last Post: 06-21-2009, 10:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •