Results 1 to 4 of 4
  1. #1

    Oil Change help!

    Good day everyone. I have a 2010 VX Cruiser. The service manual says to run the engine for 10 mins if its below a certain temp.
    with the water hose hooked up of course.
    My questions is do i really need to? Can i just suck it out with the engine cold? my thinking is the oil is only getting half warmed up at 10 mins and i creates condensation in the oil for winter storage.

    Just curious what you guys do?

    Thank you!

  2. #2
    This is how I run a jetski shop in the desert nmpeter's Avatar
    Join Date
    May 2008
    Location
    Elephant Butte New Mexico
    Posts
    9,327
    +1
    2,353
    welcome aboard GH

    its always best practice to follow the service manuals advice

    Trying to pump cold oil out often takes far longer but on the yamaha vx engine you MUST run the engine to get all the oil out of the sump and up into the oil tank so it can be pumped out

    and by the way, you'll only get 2.5 -3 qts out, so make sure you put in the same amount you pumped out, or you'll learn something else about yamahas real quick

    Overfilling the engine with oil, which is a really common mistake will result in your air filter becoming staurated with blow by oil and those puppies cost upwards of $75

    its not suggested to run without it.

    so..follow the service manual, carefully.

  3. #3
    Myself's Avatar
    Join Date
    May 2007
    Location
    North Central Arkansas
    Posts
    4,518
    +1
    414
    Even in colder weather, like 50's for winterization, The engine will build enough heat to thin the oil in 5 minutes at idle. Start it up, hit the stopwatch, turn on the water but only enough to make flow. You WANT to feel a bit of heated water coming out. 4-5 minutes, ready to change the oil.


  4. #4
    steve45's Avatar
    Join Date
    Feb 2008
    Location
    Texas
    Posts
    8,164
    +1
    845
    Don't forget, NEVER run the water unless the engine is running! Start the engine, THEN turn on the water. Turn off the water, THEN shut off the engine.Allowing water to run when the engine isn't running can get water in the cylinders and cause major engine damage.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Oil change/ spark plug change packages
    By seabrook in forum Yamaha PWC Performance (4-stroke)
    Replies: 4
    Last Post: 02-26-2019, 04:50 PM
  2. Replies: 7
    Last Post: 06-27-2017, 03:58 PM
  3. Oil change question - do I need to warm up the machine before doing an oil change?
    By hotsoup in forum Yamaha PWC Performance (4-stroke)
    Replies: 6
    Last Post: 08-30-2014, 04:47 PM
  4. 250X oil change 3.5 or 4 quarts with filter change
    By efizjb in forum Kawasaki PWC Performance (4-stroke)
    Replies: 7
    Last Post: 05-17-2009, 12:18 PM
  5. will a generic marine oil pump suffice to change my RXP'oil?
    By theantiRXP in forum Sea Doo How To & FAQs
    Replies: 2
    Last Post: 06-25-2005, 12:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •