Results 1 to 10 of 10
Thread: VXR not reaching top speed
-
02-21-2021, 09:14 AM #1
- Join Date
- May 2020
- Posts
- 2
VXR not reaching top speed
Hey guys I need some help. I've had this 2013 yamaha VXR for awhile I I it dirt cheap because it wasn't treated right. I changed oil, the filter, spark plugs and battery, and prop. It never reached anything above 42-45 mph. My yamaha VX cruiser is faster than it. I checked the air filter yesterday it was pretty dirty but I don't think enough to make it lose 20 mph of speed. Any thoughts? Has clean gas.
-
02-21-2021, 09:26 AM #2
Try a test run without the filter and see what happens.
-
02-21-2021, 10:05 AM #3
What rpms is it turning?
-
02-21-2021, 02:58 PM #4
- Join Date
- Apr 2007
- Location
- JUST NORTH OF CUBA-- FL,KEYS
- Posts
- 2,797
- +1
- 113
start up , no water , 30 second run time, shut off, put hand on exh manifold = feel heat on each manifold runner.
Find dead cyl and hope its a bad coil...
Also can pull glugs, put palm of hand over spark plug hole in cover, crank motor + see if each feels the same pressure.. To check for no psi in a cyl...
-
02-21-2021, 03:45 PM #5
- Join Date
- Mar 2016
- Posts
- 290
- +1
- 37
Run it without the air filter and see what happens. If not any better it's probably a bad coil pack.
Assuming oil level is fine.
-
02-21-2021, 03:59 PM #6
Filter would need to be badly plugged to lose 20mph. I’d say there’s another issue, and more info is needed.
-
+1 by:
-
02-26-2021, 09:53 PM #7
Don't hate when folks don't follow up????
-
02-27-2021, 09:04 PM #8
-
02-27-2021, 09:12 PM #9
Oh damn, you might be right. Sounds about right on speed.
Try this man... Probably same procedure for your ski. Hopefully you still have the remote, that can get costly to reprogram at the dealer.
So often, it's the simple things that are missed.
-
02-28-2021, 09:37 AM #10
Julian? Julian, where are you?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
2013 VXR not reaching top end
By Julian2525 in forum Yamaha PWC Performance (4-stroke)Replies: 3Last Post: 06-03-2020, 10:59 AM -
01' Virage TX 1200 not reaching top speed
By meganosky in forum Polaris Open DiscussionReplies: 6Last Post: 06-06-2014, 02:18 PM -
Reduces to 6,750 RPM when reaching top speed
By OneJESUSGod in forum 4-Tec PerformanceReplies: 23Last Post: 10-10-2013, 09:07 PM -
Ultra 250X 07 Not reaching the top speed
By hyperhomie in forum Kawasaki PWC Performance (4-stroke)Replies: 4Last Post: 08-08-2012, 03:04 AM -
Not reaching top speed
By Wvoutlawbkkkr in forum Yamaha PWC Performance (2-stroke)Replies: 7Last Post: 07-05-2011, 09:22 PM
Those numbers seem fine to me. Testers vary. I had around those numbers...
What should GP1200r compression be?