RXP 300 - Adding Cam to Stage 2 Plus setup? (Stock Charger)

[Dryburgh27]

For Stage 2 plus cam there is 2 options:

- Run VT11 injectors
- Run fuel pressure regulator at 65psi

There is a tune for each setup.

We will work in a new tune base on the 2021 software that might allow to run the CAM with stock injectors and stock fuel pressure regulator, but it will take some time yet.

Jesus could you clarify the fuel system setups please, I already have the VT11 injectors on my ski as part of the stage 2+ setup so I’m assuming if I added the cam with the correct map I shouldn’t need any other changes to the fuel system ? For example if I already have the VT11’s I won’t need to change out the fuel pressure regulator as well ?

[JESUS G]

Jesus could you clarify the fuel system setups please, I already have the VT11 injectors on my ski as part of the stage 2+ setup so I’m assuming if I added the cam with the correct map I shouldn’t need any other changes to the fuel system ? For example if I already have the VT11’s I won’t need to change out the fuel pressure regulator as well ?

Correct....


Anyway, check the library in this link : https://www.maptunerusa.com


I made that website to try to help and give you guys a more complete info about all the tunes available. If you dont see your setup there, but you see a file is close to, then we can make it happen making a log file with AFR, etc ....


For more info just send me an email: jesusg@rivaracing.com

[711jrp]

Correct....


Anyway, check the library in this link : https://www.maptunerusa.com


I made that website to try to help and give you guys a more complete info about all the tunes available. If you dont see your setup there, but you see a file is close to, then we can make it happen making a log file with AFR, etc ....


For more info just send me an email: jesusg@rivaracing.com

Hey Jesus
I thought I'd ask here as it might help some members down the line, I'm doing this stage3 plus cam on a 300 just waiting for a few bits that are on back order.

https://www.4-tecperformance.com/ind...oducts_id=7468

The question is, in this kit there is a RRFPR the same as on the Riva site but in the link to the library of tunes the tune doesn't call for one, I have ordered one, would it be correct to run it?