Results 1 to 4 of 4
  1. #1

    How to connect AFR sensor module analog output to MaptunerX Datalog Input 3.5mm input

    Hi
    To datalog or live view monitoring the AFR data and after analyze the logs go and edit the map with the maptunerX edit app.

    I need to know if anyone has already use another AFR sensor module like :

    - AEM AFR UEGO Gauge controller (30-4110) with an LSU4.9 O2 Sensor with the analog output of 0 to 5V (the white cable from the controller)
    or the
    - Innovate MTX-L Plus Digital AFR Gauge and Controller with the analog output of 0V to 5V (the yellow cable from the controller)

    and not the PLX Wideband AFR Sensor module that come with the MaptunerX Data Logging kit that has too an analog output (The gray cable that connect to the n3 of the plug of 4 wires)

    Can someone make a photo of the :
    Riva
    MaptunerX HDMI Male/Female 3.5 mm expansion cable (item # 01-MT019)
    I would like to see the other connexion except the HDMI on this cable

    So how can we connect other analog output to this Riva expansion cable ?
    Is it an 3.5mm male to female jack input ? or another type of connexion to receive the AFR signal from the controller (0 to 5V signal) to be input in the MaptunerX ?

    Thank you for your help.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	F144969165.jpg 
Views:	27 
Size:	35.2 KB 
ID:	469812   Click image for larger version. 

Name:	715eCIaW1SL._AC_SL1500_.jpg 
Views:	30 
Size:	56.4 KB 
ID:	469813   Click image for larger version. 

Name:	F144954903.jpg 
Views:	27 
Size:	20.8 KB 
ID:	469814   Click image for larger version. 

Name:	F144954233.jpg 
Views:	29 
Size:	22.1 KB 
ID:	469815   Click image for larger version. 

Name:	F144954236.jpg 
Views:	30 
Size:	25.1 KB 
ID:	469816  

  2. #2
    ptscon's Avatar
    Join Date
    Jul 2013
    Location
    Toronto
    Posts
    4,386
    +1
    943
    MaptunerX does not have any analog inputs.

    Keep in mind that if you're using analog output from any controller the receiver, a gauge or anything else, should be powered by the controller or you may experience whats known as "ground offset" and AFR reading will not be accurate on the receiver side. You should check what the controller is seeing internally vs what the receiver thinks its receiving from the controller. It could be a very small difference or it could be more significant depending on the wiring.

  3. #3
    Ok I understand

    But is there anyone who can show the connection of the Dataloging set between the :
    PLX Wideband AFR Sensor module that come with the MaptunerX Data Logging kit
    and the
    Riva MaptunerX HDMI Male/Female 3.5 mm expansion cable
    please ?


    Quote Originally Posted by ptscon View Post
    MaptunerX does not have any analog inputs.

    Keep in mind that if you're using analog output from any controller the receiver, a gauge or anything else, should be powered by the controller or you may experience whats known as "ground offset" and AFR reading will not be accurate on the receiver side. You should check what the controller is seeing internally vs what the receiver thinks its receiving from the controller. It could be a very small difference or it could be more significant depending on the wiring.

  4. #4
    Any news ?


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. SOLD Dynojet CMD + Wideband sensor + AFR sensor + AFR Gauge and Vtech Hand held
    By Turbo Retro in forum Sea Doo Classifieds
    Replies: 1
    Last Post: 06-04-2014, 06:39 AM
  2. Just looking for input on Acura O2 sensor issue
    By sfackett0 in forum Open Discussion
    Replies: 4
    Last Post: 11-26-2009, 05:02 PM
  3. need input
    By tony4963 in forum 4-Tec Performance
    Replies: 5
    Last Post: 06-01-2007, 09:28 PM
  4. Your input on this please
    By mikegpr03 in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 02-05-2007, 12:24 AM
  5. I need your input!
    By Green Hulk in forum Yamaha PWC Performance (2-stroke)
    Replies: 19
    Last Post: 01-10-2006, 11:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •