turbo drain line location ?

[elias799]

I put mine to the PTO housing

Thats exactly where i put mine also.

[elias799]

Its the housing where your magnito is and the driveshaft coupler

[elias799]

Almost done

[hotbutta]

That intake hose is likely to collapse.

[seabrook]

good lord no wonder superchargers are used in pwcs over turbos look at all that crammed in there!!!

[elias799]

That intake hose is likely to collapse.

You are probably right. Might have to look at different piping. Maybe run it under the rear seat.

[mittens]

Anyone have thoughts on this? For the turbo drain? I wanted to be as low as possible to the pan as the turbo will not be mounted super high. Top of turbo right even with top of midwall.

If I put the T in the Engine drain, the angle forward from rear of engine to the pan would make the T a slight up hill comging from turbo.

This allows the turbo the lowest point to connect. And should still allow the engine to drain back to the pan. I can shorten the upper hose to raise the turbo (bare end) if need be a little too.

All will be clamped and stuff. Before running. and the picsture is taken not level. the T is sitting level currently. and can be move to a downward slope by shortening the upper hose

[mittens]

Nothing?

[elias799]

Nothing?

I do not see why it wouldn't work.

Worst case scenario you can just put a scavenger pump on it.

[mittens]

I do not see why it wouldn't work.

Worst case scenario you can just put a scavenger pump on it.

Really trying to not do that. just more shit to break.