SVHO Turbo Sizing / General questions on turbo builds

[alex46]

[QUOTE = isa alnoaimi; 3112675] Creo que la semana que viene habré terminado con esta compilación

what a great job

[mittens]

what props are you turbo guys running? Currently I am running a 13/20 but tweaked by dean... so I assume it was tweaked down a little 13/19ish? will have to ask him. and stock pump cone.

I assume with a turbo making more power at same boost level even at 16-17 lbs I will be spinning my current prop close to 9300 ish.. let alone 18-20 lbs of boost. think a Cone will be all I need with the turbo or will tweaking my prop again / buying a stock 13/20 be needed?

I would like to be spinning 9000-9200, and pulling into the 90s even in the heat if possible.

[bryan.daniel1990@gmail.co]

what props are you turbo guys running? Currently I am running a 13/20 but tweaked by dean... so I assume it was tweaked down a little 13/19ish? will have to ask him. and stock pump cone.

I assume with a turbo making more power at same boost level even at 16-17 lbs I will be spinning my current prop close to 9300 ish.. let alone 18-20 lbs of boost. think a Cone will be all I need with the turbo or will tweaking my prop again / buying a stock 13/20 be needed?

I would like to be spinning 9000-9200, and pulling into the 90s even in the heat if possible.

im running a 14/21 measured out at 15/23 and im at 8160 rpms at 17psi lol

[isa alnoaimi]

finally started the ski today !!!

have a lot of cleaning to do thou

[1tommygunner1927]

what props are you turbo guys running? Currently I am running a 13/20 but tweaked by dean... so I assume it was tweaked down a little 13/19ish? will have to ask him. and stock pump cone.

I assume with a turbo making more power at same boost level even at 16-17 lbs I will be spinning my current prop close to 9300 ish.. let alone 18-20 lbs of boost. think a Cone will be all I need with the turbo or will tweaking my prop again / buying a stock 13/20 be needed?

I would like to be spinning 9000-9200, and pulling into the 90s even in the heat if possible.

Depends on desired rpm. I use a 3 blade Skat Trac pitched 15/21 at about 9000 with a 83mm nozzle.

[alex46]

looking forward to the test in water, right?

[alex46]

¿Cuál es su ecu para obtener 9000 rpm?

[isa alnoaimi]

¿Cuál es su ecu para obtener 9000 rpm?

stock ECU for now , i have maptuner x & mapeditor so i can adjust it .

[alex46]

Sorry, what is your ecu to get 9000rpm?

[isa alnoaimi]

Sorry, what is your ecu to get 9000rpm?

my rev limiter now is set on 9500 rpm , i can adjust it to what ever i want because i have the mapeditor option .

my prop is 13/18 (in ski now)

i have also the twin 12/18