Results 1 to 10 of 19
Hybrid View
-
10-16-2020, 10:44 AM #1
- Join Date
- Aug 2012
- Posts
- 1,406
- +1
- 142
Front Storage Intake Vs Side Cowl Intake
Anybody tested a front storage intake setup versus a side cowling in the same conditions BOTH without air filters ? I have a feeling the front compartment intake would turn more rpms but I would rather not chop up a friends ski if its just going to slow him down lmao.If anybody has done any testing without any difference in variables I would be interested in hearing the results Thanks
-
10-16-2020, 08:14 PM #2
What model and yr ski are you modding?
I know with my 17 GP I first did direct connect to both cold air intakes and my seat would shudder or almost flap like wings by my knees. It would also whistle at idle to maybe 4500-5000 rpm
I’ve been using a homemade version of the ultimate cold air mod and all those negatives went away. I also added 2 more additional air intakes to the front compartment. I did pick up some rpm but can’t tell you exactly how much
I much prefer the ultimate air intake much better
Sorry I couldn’t be of more helpLast edited by BLASTER 1; 10-16-2020 at 09:47 PM.
-
+1 by:
-
10-18-2020, 05:43 AM #3
- Join Date
- Aug 2018
- Location
- Jax, FL
- Posts
- 162
- +1
- 14
Running a Macsboost intake with the hull vents redirected at it. Very simple, effective and cost efficient.
-
10-18-2020, 10:39 AM #4
- Join Date
- Aug 2012
- Posts
- 1,406
- +1
- 142
Thank you for sharing.Unfortunately we use to run similar short ram intakes many years ago and its not even close in comparison.Both of the setups I previously mentioned outperform it by 200 to 250 rpms across the board.What I dont know is the exact rpm difference between those two but my educated guess is it is a very small difference maybe only 50 to 100rpms.Still waiting to see if anyone whos tested both back to back same day same conditions can confirm
-
+1 by:
-
10-18-2020, 01:01 PM #5
- Join Date
- Aug 2018
- Location
- Jax, FL
- Posts
- 162
- +1
- 14
-
10-19-2020, 05:08 PM #6
-
10-21-2020, 12:17 AM #7
- Join Date
- Aug 2018
- Location
- Jax, FL
- Posts
- 162
- +1
- 14
-
10-24-2020, 04:27 AM #8
- Join Date
- Aug 2018
- Location
- Jax, FL
- Posts
- 162
- +1
- 14
-
10-24-2020, 10:25 AM #9
- Join Date
- Sep 2019
- Location
- Philadelphia
- Posts
- 83
- +1
- 13
i dont think anybody "jumped the gun," here. If you look who has commented so far you will see they have extensive knowledge on the subject. As do i being that i just sent an afternoon testiing intakes. My results were exactly inline with countless others before me. The macboost short ram produces gains over the oe box. But was consistently the slowest and provided the least rpm gains , kanaflex direct to left side cowling provided the biggest gain followed by the riva/ worx cold air,,, all testing was done same day. On a yamaha fzs making around 14.5 lbs of boost. Iam just sharing with you my complete unbiased results!!!
-
10-18-2020, 01:32 PM #10
- Join Date
- Sep 2019
- Location
- Philadelphia
- Posts
- 83
- +1
- 13
Havnt tested the front storage but have extensive testing on short ram filter wit both factory vents directed to it. Standard cold air offering (riva,worx) power filter, then with left side cowling intake direct to charger with foam blocks removed,, Spent about 3 hrs same day same temp,same air. My fzs was consistently .8mph faster with left side cowling kanaflex direct to s/c 90-100rpm average gain. The short ram direct on the charger with both hull vents redirected was the slowest sorry this wasnt exactly the comparison you were lookin for, but just figured i would share
Last edited by Yamafzs; 10-18-2020 at 01:34 PM. Reason: Spelling
-
+1 by:
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
WTB Looking for a Left side Blue FZR plastic cowl.
By Water4fire in forum Yamaha ClassifiedsReplies: 0Last Post: 01-10-2014, 06:46 PM -
Rear cowl air intake does not fit now ?
By canuck in forum 4-Tec PerformanceReplies: 5Last Post: 10-11-2013, 11:59 PM -
4 tec intake (suction side)
By jtrudel90 in forum 4-Tec PerformanceReplies: 4Last Post: 02-26-2012, 07:32 PM -
Intake in storage bin?
By mikestyle in forum 4-Tec PerformanceReplies: 1Last Post: 03-04-2010, 10:49 AM -
oil coming out of charger on intake side?
By STSPERFORMANCE in forum 4-Tec PerformanceReplies: 2Last Post: 08-11-2009, 03:25 PM
I would be looking for a stock standing jet ski. it doesn't matter if...
SXR 800 - 850 - gp ski