Results 1 to 3 of 3
  1. #1

    Bow eye removal and reinstall

    The plastic cosmetic shell around the bow eye on my GTI130 is cracked and I have a replacement shell. From the inside I see the 2 nuts that presumably are the only things holding the bow eye in place. My 2 questions are then...

    Once those 2 nuts are removed is the bow eye free to come out or is there something else that needs to be done such as breaking a silicone seal or something else?

    Then when I go to reinstall the eye, do I coat the threads with any sealant or perhaps Loctite? My concern would be it leaking or eventually working loose - donít know if either are possible but donít want to take chances.

    Appreciate the help especially from someone who may have done this before. Thank you!


  2. #2
    Xspook's Avatar
    Join Date
    Jan 2014
    Location
    Space coast, FL (Brevard County)
    Posts
    1,613
    +1
    319
    The parts diagram doesn't mention any sealant. Looks like removing the two nuts should do the job.

    http://partsfinder.onlinemicrofiche....eadoopwc&a=627

  3. #3
    EVN81's Avatar
    Join Date
    Jul 2013
    Location
    Terschelling - the Netherlands
    Posts
    806
    +1
    82
    Correct as described above.
    I replaced that shell also once. No sealant, just loosen the 2 nuts.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Bow Eye Connector
    By Vanyel1970 in forum Yamaha PWC Performance (4-stroke)
    Replies: 6
    Last Post: 05-02-2012, 11:07 PM
  2. Bow Eye Replacement
    By Taza in forum Yamaha Open Discussion
    Replies: 0
    Last Post: 05-17-2010, 03:59 PM
  3. Bow Eye Replacement
    By steach in forum Yamaha How To & FAQs
    Replies: 5
    Last Post: 01-03-2009, 08:54 PM
  4. bow eye installation
    By jprochnow in forum Yamaha Open Discussion
    Replies: 2
    Last Post: 08-05-2008, 11:48 AM
  5. Bow Eye Removal
    By ehudson94 in forum Yamaha How To & FAQs
    Replies: 4
    Last Post: 07-21-2008, 04:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •