Results 1 to 10 of 16
-
06-16-2007, 05:37 PM #1
- Join Date
- Oct 2006
- Location
- Los Angeles
- Posts
- 1,219
- +1
- 2
whats the correct pop off pressure?
please....
what is the correct pop off pressure for a 1995 750 slt mikuni.....and
the correct pop off pressure for a 1996 slt 780 mikuni? 12-18 psi?
on my slt 780 all three are reading 21 psi.....................
summer is here..........................everyone have a great run.........!!!!!!
and oh ya................im gonna have seat handles for
Year Model Name Model Number Assembly Name Part Number
1994 SLT B944170 SEAT ASSEMBLY SLT 750 B944170 5431756-196
1995 SLT 750 B954170 SEAT ASSEMBLY SLT 750 B954170 5431756-196
1996 SLT 780 B964588 SEAT SLT 780 B964588 and Intl. SLT 780 I964588 5431756-214
1996 SLTX B964590 SEAT SLTX B964590 and Intl. SLTX I964590 5431756-214
1996 SLT 700 B964166 SEAT SLT 700 B964166 and Intl. SLT 700 I964166 5431756-196
1996 INTL SLT 780 I964588 SEAT SLT 780 B964588 and Intl. SLT 780 I964588 5431756-214
1996 INTL SLTX I964590 SEAT SLTX B964590 and Intl. SLTX I964590 5431756-214
1996 INTL SLT 700 I964166 SEAT SLT 700 B964166 and Intl. SLT 700 I964166 5431756-196
1997 INTL SLTX I974590 SEAT SLTX B974590 and INTL. SLTX I974590 5431756-242
1997 SLT 700 B974572 SEAT SLT 700 B974572 5431756-217
1997 SLTX B974590 SEAT SLTX B974590 and INTL. SLTX I974590 5431756-242
1997 SLT 780 B974588 SEAT SLT 780 B964588 and Intl. SLT 780 I964588 5431756-237
1998 SLTX B984590 SEAT - B984590 5431756-242
1998 INTL SLTH I984573 SEAT - I984573 5431756-204
1998 SLTH B984573 SEAT - I984573 5431756-204
1998 INTL SLTX I984590 SEAT - B984590 5431756-242
1999 SLTX B994590 SEAT - I994590 5431756-294
1999 SLTX-B B994596 SEAT - B994596 5431756-204
1999 INTL SLTH I994573 SEAT - I994573 5431756-277
1999 INTL SLTX I994590 SEAT - I994590 5431756-294
1999 SLTH B994573 SEAT - I994573 5431756-277
in the very very very very near future....................
-
06-16-2007, 05:54 PM #2Moderator
- Join Date
- Aug 2006
- Location
- CT
- Posts
- 25,969
- +1
- 1,446
I show 10-18psi for the 1995 I cant fine info for the 1996 but it should be the same or close to the 1995. 21 psi is fine as your gauge might be off a little. Let me know about the seat handles I need one....
-
06-16-2007, 06:58 PM #3
- Join Date
- Oct 2006
- Location
- Los Angeles
- Posts
- 1,219
- +1
- 2
ok thanks. im gonna leave it alone then............as long as all 3 are the same pop off i figure thats a-ok....................ski ran fine last year. had a great year last year with both ski's. just doing thorough carb cleaning on both ski's and i deciding to try out my new pop off tool (biclycle pump). regarding seat handle. they are going to be new replacement/aftermarket seat handles. they will be very close to the oem ones. and approximate in color. be available by 2 weeks hopefully. i will be manufacturing them. as i saw there is a need/desire for them. hopefullypeople are happy with them.
-
06-16-2007, 11:24 PM #4She likes the bike. But the ski gets her wet!!!!
- Join Date
- Oct 2006
- Location
- Cleveland OH
- Posts
- 18,370
- +1
- 102
750 is 12 - 18 psi. And a 96 SLX 780 is 20 - 24 psi. It should have a 2.0 needle/seat with a black spring.
-
06-17-2007, 10:53 AM #5
- Join Date
- Oct 2006
- Location
- Los Angeles
- Posts
- 1,219
- +1
- 2
the 1996 slt 780 mikuni is what? psi?
not slx
750 is 12 - 18 psi. And a 96 SLX 780 is 20 - 24 psi. It should have a 2.0 needle/seat with a black spring
-
06-17-2007, 11:13 AM #6Moderator
- Join Date
- Aug 2006
- Location
- CT
- Posts
- 25,969
- +1
- 1,446
They both have Mikuni. The SLTX had CDK.
-
06-17-2007, 01:33 PM #7
- Join Date
- Oct 2006
- Location
- Los Angeles
- Posts
- 1,219
- +1
- 2
is it better to have a higher pop-off pressure or lower pop-off pressure? what the ideAL aproximate pop-off pressure for the 1995 slt750 and the ideal pop-off presuure for the 1996 slt780
-
06-17-2007, 02:04 PM #8Moderator
- Join Date
- Aug 2006
- Location
- CT
- Posts
- 25,969
- +1
- 1,446
It is more of a range as its hard the reed low psi with that much accuracy.
http://www.greenhulk.net/forums/show...98&postcount=7
-
10-31-2007, 04:32 PM #9
- Join Date
- Oct 2006
- Location
- Los Angeles
- Posts
- 1,219
- +1
- 2
Seat Handle
HERE ARE THE FIRST ONE'S TO COME OUT..................................PICKED THEM UP TODAY ALSO WITH THE MOLD I HAD SPECIALLY MADE FOR THIS HANDLE...................I CAN MAKE THEM MORE OR LESS COLOR SPECIFIC TO THE YEAR BOAT BUT NOT GUARRANTEED............I DONT KNOW YET ABOUT PRICING..............THESE PIECES ARE IN THESE PASTEL COLORS BECAUSE ITS WHAT WAS AVAILABLE AT THE SHOP REGARDING THE DIE/COLOR AVAILABILITY....................
I'M JUST EXCITED THAT IT FINALLY CAME THROUGH.................!!!!!!!!!!!!
Originally Posted by la90043
-
10-31-2007, 04:54 PM #10Click avatar for tech links/info
- Join Date
- Jul 2007
- Location
- near Toronto, Canada
- Posts
- 46,958
- +1
- 2,772
Why are you making these? Originally Posted by la90043
Are they a direct replacement for the OEM handles, or something different?
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
99 - sltx , pop off pressure ? which spring out of the 3
By 1999-SLTX in forum Polaris PWC PerformanceReplies: 2Last Post: 07-14-2013, 03:16 PM -
"Pop Off" pressure over the high limit.
By LaveyT in forum Polaris Open DiscussionReplies: 6Last Post: 02-21-2012, 06:00 PM -
What is the pop off pressure of a 96 ZXI 900
By chvscks319 in forum Kawasaki Open DiscussionReplies: 0Last Post: 10-18-2010, 01:22 PM -
pop off pressure on Keihin carbs, what am I missing?
By Texwing in forum Kawasaki Open DiscussionReplies: 0Last Post: 10-03-2009, 02:22 PM -
My Pop Off Pressure Is What?!?!
By ZOMGVTEK in forum Polaris Open DiscussionReplies: 4Last Post: 07-13-2008, 11:41 PM
Thank you in advance for any help. I made a promise to the niece that I...
Just can't figure it out.......No...