Results 1 to 6 of 6
Thread: Fiberglass questions
-
02-03-2006, 11:00 PM #1
Fiberglass questions
Anybody know where I can get black color agent for gelcoat repair? All I can find are the kits with stupid little tubes. Im almost done with my ski, but I'll have to replace the color agent I've used.
Also I keep getting porosity in my repairs, how do I get rid of that?
Any other fiberglassing pointers (that are not readily available on the net)?
-
02-03-2006, 11:58 PM #2
- Join Date
- Jan 2006
- Location
- Rydal, Georgia U S A
- Posts
- 3,920
- +1
- 15
I think I bought may last qt at boaters world?
-
02-04-2006, 12:00 AM #3
what a quart of gelcoat or a quart of the color agent?
-
02-04-2006, 01:41 AM #4
Find a tub of black pigment with some white gelcoat and keep adding black pigment to the white gelcoat till its right.It will take alot of mixing to get the pigment to mix in with the white gelcoat.
-
02-04-2006, 01:50 AM #5
- Join Date
- Jan 2006
- Location
- Rydal, Georgia U S A
- Posts
- 3,920
- +1
- 15
black gelcoat
-
02-04-2006, 02:21 AM #6
Thats if he can't find any black gelcoat.And if your working with fiberglass in cold weather its best to do the work in a warm building or use a heat gun to warm the pitched area after you have applied the fiberglass and resin.That is so the resin don't run out of the fiberglass and make air pockets.The colder the weather the longer it will take the resin the cure,the warmer the weather with the right mix of hardener it will work fine.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Will Heat Gun damage nano/fiberglass hull and question on tunnel reinforcement ?
By peclark in forum Yamaha PWC Performance (4-stroke)Replies: 8Last Post: 01-30-2012, 12:02 AM -
SMC & Fiberglass Repair question
By chvscks319 in forum Open DiscussionReplies: 4Last Post: 03-23-2010, 11:17 AM -
158 Thermostat question...
By rx4pain in forum 4-Tec PerformanceReplies: 34Last Post: 11-21-2008, 10:36 PM -
Question about "fiberglass" Trailer
By rob2337 in forum Polaris Open DiscussionReplies: 13Last Post: 09-22-2008, 12:38 PM -
Fiberglass / SMC hull question
By Vern in forum Yamaha PWC Performance (2-stroke)Replies: 2Last Post: 02-26-2008, 10:41 PM
I said "better" not good or trustworthy I do not have any kind of business...
Remove an ECU tune?