Someone with a 15f.. Need a few minutes of your time please

[BrandonB]

I've got a dumb idea rolling around in my head and I want to shoot it down. Can I get someone to measure the overall dimensions of their motor? Also if it's not too much trouble could I get the spacing of the motor mounts and how far the driveshaft is from the botom of the engine?


Thanks

[dreww]

I've got a dumb idea rolling around in my head and I want to shoot it down. Can I get someone to measure the overall dimensions of their motor? Also if it's not too much trouble could I get the spacing of the motor mounts and how far the driveshaft is from the botom of the engine?


Thanks

are you planning a 150 w/ a 15f transplant

[BrandonB]

are you planning a 150 w/ a 15f transplant

Thinking.. considering.. dreaming.. Maybe

[dreww]

Thinking.. considering.. dreaming.. Maybe

god, you can barely keep the 145hp on the water with an ultra. I can only imagine how the holeshot torque would be...
thing would probably jump outta the water.

[antman]

These measurements are rough:
Length 18" Width 21" with intake and exhaust included. 9-10" without
Motor Mounts 16" wide end to end widest point not center to Center which would be less and length on M is 23 end to end. Couldn't tell on the driveshaft. Hope this helps.
Ant...