Results 1 to 10 of 16
-
06-15-2007, 05:42 PM #1
- Join Date
- Jun 2007
- Posts
- 31
Awsome Awsome Awsome Found info in tech portion
Oh yea - I found the great article on troubleshooting and diagnosing the carbs on the 97 slt in the tech section. I am going to rebuild my carbs and then take them to a mech. to set the pop off press. If I can buy the tool and do it my self I would prefer that. Also I would like to rebuild the entire carbs(including the pump). Is there a kit the has it all?
I cant beleive I past that info up. I know I must have missed it at least 50 times. After a while you get tangle eyed. Best to sleep on it and come back and reveiw it again. This site is Awsome
-
06-15-2007, 05:59 PM #2
You can make a pop-off tester from any pump. Bicycle, Keg, Air Mattress, Compressor with a regulator......
-
06-15-2007, 10:30 PM #3
- Join Date
- Jun 2007
- Posts
- 31
cool what type of pressure gauge and what should the pressure pop at. Where can I order a complete kit from. I found a couple of sites but they sell many diff kits for diff parts of carb.
Also I am almost sure but hey, do I have a fuel float? I could not see one on the carb diagram.Last edited by crashem; 06-15-2007 at 10:37 PM.
-
06-19-2007, 06:48 PM #4
-
06-19-2007, 06:53 PM #5
The only thing that bothers me about the bike pump just a little bit is its accuracy. I think this would be great for verifying the pop off in all three carbs are the same BUT is it enough to accurately set your pop-off with. Anybody compare this pump with something that cost some more bucks? I'm dyeing of curiosity.
-
06-19-2007, 06:53 PM #6
more pics. this one is/was $9.99
Last edited by la90043; 06-19-2007 at 06:57 PM.
-
06-19-2007, 06:56 PM #7
-
06-19-2007, 07:03 PM #8
please. whats the nominal/best pop-off presuure for
1995 slt750
1996 slt780
-
06-19-2007, 07:06 PM #9
You should be able to find that in our tech section under "Fuji Fuel"
-
06-19-2007, 07:10 PM #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
found part in rtx
By scooter37x in forum 4-Tec PerformanceReplies: 1Last Post: 04-27-2009, 09:18 PM -
Found this in New Jersey
By Dr Len in forum Polaris ClassifiedsReplies: 8Last Post: 04-17-2009, 09:11 PM -
Found hole in housing- Problem ?
By Piney in forum Sea Doo Open DiscussionReplies: 2Last Post: 02-03-2009, 06:19 PM -
found this in my hull....???
By Kaybat in forum 4-Tec PerformanceReplies: 13Last Post: 11-13-2008, 07:59 PM -
HELP, found OIL in footwell 06GP1300R
By Toobold in forum Yamaha Open DiscussionReplies: 6Last Post: 06-18-2007, 01:11 AM
Take the power valve covers off and make sure there’s also Waveater clips...
2004 gp1300