Results 1 to 5 of 5
  1. #1
    GDS's Avatar
    Join Date
    Aug 2019
    Location
    South East Kansas
    Posts
    76
    +1
    3

    Need Help with Carbs

    I have been working on my 95 SL750. I can't seem to get the carbs correct. It wants to bog when trying to power up.
    I have torn these down twice, cleaned, put new kits with needle and set and adjusted to specs. This time seems worst than last.
    I put it in the water and set idle. started to adjust the low speed needle and nothing. Turned it out, turned it in and no difference in RPM's. And to make it worse all 3 carbs are that way. So what the hell am I'm missing?


  2. #2
    Myself's Avatar
    Join Date
    May 2007
    Location
    North Central Arkansas
    Posts
    4,110
    +1
    338
    Check your fuel pickup and switch. Sounds like it could be sucking air.

  3. +1 by:


  4. #3
    GDS's Avatar
    Join Date
    Aug 2019
    Location
    South East Kansas
    Posts
    76
    +1
    3
    All new fuel line that I can see through. I was getting some bubbles at one time but have that taken care of. New fuel pump also.

  5. #4
    This is how I run a jetski shop in the desert nmpeter's Avatar
    Join Date
    May 2008
    Location
    Elephant Butte New Mexico
    Posts
    8,988
    +1
    2,185
    have you checked the reeds?
    pop off pressure?

    possible the lows are clogged with ethanol goo.

    history of carbs?

  6. #5
    GDS's Avatar
    Join Date
    Aug 2019
    Location
    South East Kansas
    Posts
    76
    +1
    3
    New Reeds, pop off is set to 14lb, all passageways seemed open when I last cleaned it but apparently something is wrong.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: 05-13-2013, 12:20 PM
  2. FS Carbs carbs and more carbs for GP1200R & 1200 XLT
    By leejax01 in forum Yamaha Classifieds
    Replies: 4
    Last Post: 02-02-2012, 10:16 PM
  3. Buck SHot Carbs vs Novi Carbs
    By Yimihemi1200 in forum Yamaha PWC Performance (2-stroke)
    Replies: 8
    Last Post: 06-28-2011, 09:07 AM
  4. WTB 785 Rave Valve, Head,Pipe, Intake to carbs,Carbs
    By xpl2008 in forum Sea Doo Classifieds
    Replies: 3
    Last Post: 03-12-2011, 02:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •