Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1

    Easy Way to Clean Hull

    I have some oxidation/staining on a 2010 GTX 155 that I recently purchased. It has about 237hrs on it but I think the previous owner neglected and left it sitting out. Is there an easy way to get this off? I have tried wax, and rubbing compound by hand and neither did anything. Would a powered polisher with rubbing compound work or will this have to be sanded?

    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_20200223_173052.jpg 
Views:	178 
Size:	82.3 KB 
ID:	458407   Click image for larger version. 

Name:	IMG_20200223_173121.jpg 
Views:	178 
Size:	92.2 KB 
ID:	458408   Click image for larger version. 

Name:	IMG_20200223_173045.jpg 
Views:	175 
Size:	70.5 KB 
ID:	458409  

  2. #2
    steve45's Avatar
    Join Date
    Feb 2008
    Location
    Texas
    Posts
    7,016
    +1
    683
    Since the decal doesn't seem to be affected, I would guess that it's oxidation. Compound & wax would probably be the best route.

    If it's hard water stain, which would probably discolor the decal, use vinegar & water or Ducky.

  3. #3

  4. #4
    Thanks guys! Should I use these products by hand or should I get a buffer of some kind?

  5. #5

    Join Date
    Aug 2016
    Location
    Central Arkansas
    Posts
    186
    Just ordered some from Amazon for a little over $7 and free one-day shipping.

  6. #6
    Click avatar for tech links/info K447's Avatar
    Join Date
    Jul 2007
    Location
    near Toronto, Canada
    Posts
    41,436
    +1
    2,021
    Quote Originally Posted by philbbar715 View Post
    ... Should I use these products by hand or should I get a buffer of some kind?
    Hard to tell from just the photo.

    Looks like a half decent power buffer would make the job much easier. Takes a bit of practice to know how much pressure and buffing compund is needed, but it is a learnable skill. Go easy until you get the hang of it.

    Use a mild buffing compound and modest power/speed/pressure to take off the outermost layer of material and oxidized hull surface material.

    You may want to buy a kit with several grades of polishing/buffing compound and a few flexible buffing disks.

    Be careful around raised edges and corners. You don't want to burn right through the hull finish coating layers.

    Once the hull surface is cleaned up and the color/finish is restored sufficiently, then you can choose a protective product to bring up the gloss and seal the surface.

    If the old decals don't look good or you just want a fresher start, you can remove the old hull decals, like the Seadoo one under the rub rail.

    Note: First check that replacements for your model and year are available at reasonable cost.
    Last edited by K447; 02-24-2020 at 09:43 PM.

  7. #7
    Thanks for the advice! I tried some rubbing compound on a buffing pad on my dremel. Other than it only working on a small spot at a time it worked great and removed the oxidation! You can see it in the pics I attached ( the small shiny spot is what I did with the polishing wheel and dremel)

    I have purchased a cheaper buffer from Amazon (not one of the random orbital ones) to try it out. Hopefully it will buff out easily.

    Once it's buffed and clean does anyone have a recommendation on a product to seal and protect the surface?

    Click image for larger version. 

Name:	IMG_20200224_162605.jpg 
Views:	22 
Size:	57.8 KB 
ID:	458432Click image for larger version. 

Name:	IMG_20200224_162611.jpg 
Views:	23 
Size:	154.7 KB 
ID:	458433

  8. #8
    I wanted to give an update. I bought a cheap polisher from amazon, cheap rubbing compound, meguiar's marine wax and went to town. I started off with the polisher and foam pad, and rubbing compound and did the entire top and the hull (only the part of the hull thats visible when in water, didnt feel like doing the bottom of the hull that will be a next winter project). After rubbing compound everywhere I cleaned it off with water and meguiar's quick clean spray and a rag. After it was all clean I waxed the entire ski. Overall the results are good enough for me. Also, the last photo of the ski with a cover and snow on it is from before I did the work, just as a frame of reference for how far its come.

    I would like advise on how to get rid of the staining in the footwells, the polisher has a 7" head on it and didnt really get down in to it very well. Any suggestions for the footwell areas?

    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_20200226_160521.jpg 
Views:	93 
Size:	113.2 KB 
ID:	458524   Click image for larger version. 

Name:	IMG_20200226_160611.jpg 
Views:	11 
Size:	36.1 KB 
ID:	458528   Click image for larger version. 

Name:	IMG_20200226_160525.jpg 
Views:	92 
Size:	127.1 KB 
ID:	458525   Click image for larger version. 

Name:	IMG_20200226_160534.jpg 
Views:	95 
Size:	141.8 KB 
ID:	458526   Click image for larger version. 

Name:	IMG_20200221_082747.jpg 
Views:	16 
Size:	137.6 KB 
ID:	458527   Click image for larger version. 

Name:	IMG_20200226_160615.jpg 
Views:	11 
Size:	27.0 KB 
ID:	458529  


  9. #9
    To remove the stains, try using the Starbrite Instant Hull cleaner.


  10. #10
    ptscon's Avatar
    Join Date
    Jul 2013
    Location
    Toronto
    Posts
    3,845
    +1
    804
    This needs to be wet sanded to last. Unless you're using a super heavy duty compound you're just temporarily masking the problem. If you're not seeing black on the polishing pad you're just covering things up.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 29
    Last Post: 07-11-2016, 09:28 PM
  2. FS 2004 GTX clean hull, clean title-NO ENGINE $700.00
    By 67titusmustang in forum Sea Doo 4Tec Skis
    Replies: 2
    Last Post: 12-15-2012, 07:54 PM
  3. FS Clean title 06 gp1300r hull, Black and gold, clean title
    By crashhard in forum Yamaha Classifieds
    Replies: 6
    Last Post: 08-24-2010, 03:19 PM
  4. FS Clean 2005 rxp hull clean title 1200.00
    By ALOHR in forum Sea Doo Classifieds
    Replies: 5
    Last Post: 04-01-2010, 11:47 AM
  5. FS very clean GP1200R hull W/ clean FL title
    By pedruko in forum Yamaha Classifieds
    Replies: 2
    Last Post: 03-23-2010, 12:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •