Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    need4pwr's Avatar
    Join Date
    Jul 2006
    Location
    New Jersey
    Posts
    434
    +1
    2

    Strainer for Fizzle intercooler.

    Hey everyone,
    I installed the Riva Cooling kit with a direct feed to the Intercooler. I have concerns of salt and sand blocking the intercooler. I installed a flush kit adapter to backwash the intercooler on the outlet. Thoughts?

    Click image for larger version. 

Name:	20200121_192414.jpg 
Views:	51 
Size:	40.7 KB 
ID:	457554
    Click image for larger version. 

Name:	20200121_192344.jpg 
Views:	48 
Size:	50.5 KB 
ID:	457555


  2. #2
    you can just back flush through the intercooler pisser. make sure engine is started while you back flush

  3. #3

    Join Date
    Jul 2017
    Location
    Houston, TX
    Posts
    44
    +1
    6
    I have the Riva cooling and Fizzle intercooler as well. I fabricated a plate that attaches to the aft seat mount area to mount a strainer. You can see the four screws at the pin stud for the seat. The strainer works well and you can even see a little sand at the bottom and I only ride in lakes. I think its a worthwhile addition to help keep the intercooler clean. The strainer is also easy to access in this location without too much of a hassle.



    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_20200121_191711.jpg 
Views:	168 
Size:	106.9 KB 
ID:	457556   Click image for larger version. 

Name:	IMG_20200121_191630.jpg 
Views:	167 
Size:	77.0 KB 
ID:	457557  

  4. #4
    need4pwr's Avatar
    Join Date
    Jul 2006
    Location
    New Jersey
    Posts
    434
    +1
    2
    Quote Originally Posted by Av8ter View Post
    I have the Riva cooling and Fizzle intercooler as well. I fabricated a plate that attaches to the aft seat mount area to mount a strainer. You can see the four screws at the pin stud for the seat. The strainer works well and you can even see a little sand at the bottom and I only ride in lakes. I think its a worthwhile addition to help keep the intercooler clean. The strainer is also easy to access in this location without too much of a hassle.



    Nice! Where did you get the strainer? Model? Part number?

  5. #5
    need4pwr's Avatar
    Join Date
    Jul 2006
    Location
    New Jersey
    Posts
    434
    +1
    2
    Quote Originally Posted by bryan.daniel1990@gmail.co View Post
    you can just back flush through the intercooler pisser. make sure engine is started while you back flush
    With a direct feed from the pump, why do I need to run the engine? It would overheat with no water to it.

  6. #6

    Join Date
    Jul 2017
    Location
    Houston, TX
    Posts
    44
    +1
    6
    Quote Originally Posted by need4pwr View Post
    Nice! Where did you get the strainer? Model? Part number?
    https://www.4-tecperformance.com/ind...oducts_id=1431

  7. #7
    Quote Originally Posted by need4pwr View Post
    With a direct feed from the pump, why do I need to run the engine? It would overheat with no water to it.
    obviously not if its coming right off the pump. I didn't see that part.

  8. #8
    need4pwr's Avatar
    Join Date
    Jul 2006
    Location
    New Jersey
    Posts
    434
    +1
    2
    Thank you!

  9. #9
    need4pwr's Avatar
    Join Date
    Jul 2006
    Location
    New Jersey
    Posts
    434
    +1
    2
    Quote Originally Posted by bryan.daniel1990@gmail.co View Post
    obviously not if its coming right off the pump. I didn't see that part.
    No worries! Thanks for the reply.

  10. #10

    Join Date
    Mar 2018
    Location
    Huntsville, AL
    Posts
    404
    +1
    32
    I got a smaller one to install.

    1/2" Hose Barb In-Line Strainer... https://www.amazon.com/dp/B00CH29IK2...p_mob_ap_share

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Fizzle / pump strainer fitting / hose sizes
    By Dg1148 in forum Yamaha PWC Performance (4-stroke)
    Replies: 5
    Last Post: 11-05-2017, 11:31 PM
  2. Install instructions for strainer on fizzle
    By Jaycee84 in forum Yamaha PWC Performance (4-stroke)
    Replies: 5
    Last Post: 10-15-2016, 07:24 PM
  3. Replies: 0
    Last Post: 07-11-2015, 11:49 AM
  4. Replies: 32
    Last Post: 03-30-2015, 02:27 AM
  5. Fizzle Old intercooler and fizzle HE dimensions
    By TDR in forum 4-Tec Performance
    Replies: 23
    Last Post: 09-28-2012, 06:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •