Results 1 to 7 of 7
  1. #1

    Join Date
    Mar 2015
    Location
    miami
    Posts
    129
    +1
    3

    1100 into a 97 hull ?

    ive tried putting the 900 out the 97 to a 2004 and the bottom plate is different same as the midshaft and i had to put a washer so the midshaft gear reached and it didnt screw all the way into the crank .i took it out ..idk to much ..my question is can i swap a 97 900 stx.thats the one with electric trim ..with an 1100 ..i like that hull style ..and is brand new ..

  2. #2
    Rodsatheart's Avatar
    Join Date
    Nov 2014
    Location
    Arkansas SoCal transplant
    Posts
    549
    +1
    49
    Did you try swapping the bed plate ? You'll also need to use a 04 style drive coupling on the engine.
    Any swap is possible. Your going to need a 1100 style coupling on the driveshaft, and eventually prob. want a new impeller as you'll prob hit the rev limiter pretty quick with the small stock propped 900 pump.

  3. #3
    steve45's Avatar
    Join Date
    Feb 2008
    Location
    Texas
    Posts
    6,876
    +1
    662
    I'm confused. You've mentioned a couple of combinations. Exactly which engine do you want to put into which hull?


  4. #4

    Join Date
    Mar 2015
    Location
    miami
    Posts
    129
    +1
    3
    i want to swap a 1100 into a 97 900 wich is a different hull ...... ...

    but


    ive swapped the 97 900 engine to a 2004 900 and my main problem was the crank .where the drive coupling from the engine goes .. i had to remove the crank seal (from a different spare engine)and remove that spacer that had in the crank and shaved it down till the drive coupling. didnt have no gap with the midhaft coupler .i hate explaining i suck lol .. but yea i changed the bottom bed plate i changed the couplers the rubber in the middle .and it still gave me a little mission so i took it back out and dropped it back on the 97 900 .. .....

    has anyone done something like that .i just like the sleek body and is in really good condition

    or if its a headache ill just pass lol ..
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_3648.PNG 
Views:	15 
Size:	280.4 KB 
ID:	456551   Click image for larger version. 

Name:	IMG_3647.PNG 
Views:	15 
Size:	168.0 KB 
ID:	456552   Click image for larger version. 

Name:	IMG_3645.PNG 
Views:	16 
Size:	277.6 KB 
ID:	456553  

  5. #5
    steve45's Avatar
    Join Date
    Feb 2008
    Location
    Texas
    Posts
    6,876
    +1
    662
    It's certainly possible, but I don't know about the electronics. The 1100 STX doesn't have electric trim, and the ignition box doesn't support it. The 1100 ZXi does have electric trim, but it's ignition box doesn't support the electronic display used in the STX hulls. The fuel level sensors are different between the analog and digital displays, too.

  6. #6

    Join Date
    Mar 2010
    Location
    Long Island, NY
    Posts
    873
    +1
    75
    Hey Steve...

    Not sure if that's accurate about the e-box. I just put the motor from a 97 1100ZXi into a 2001 1100STX-DI hull. I used the e-box/igniter from the ZXi and the wiring harness and gauges from a 97 1100STX. I'm guessing the correct wiring harness was the key to getting the gauges to work... not the e-box.

    Also, the fuel level sensor works by varying resistance, for both the ZXi and STX. I'm pretty sure they are interchangeable.

  7. #7
    steve45's Avatar
    Join Date
    Feb 2008
    Location
    Texas
    Posts
    6,876
    +1
    662
    Quote Originally Posted by grumpy_steven View Post
    Hey Steve...

    Also, the fuel level sensor works by varying resistance, for both the ZXi and STX. I'm pretty sure they are interchangeable.
    From the service manuals:

    1100 ZXi fuel level sensor: 10 - 84 Ω

    1100 STX fuel level sensor: 0 - 87 KΩ

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 1100 into gp hull ?
    By fl3050 in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 10-06-2018, 06:26 PM
  2. Hull puncture on 97 Yamaha 1100
    By mrsmith988 in forum Yamaha Old School Skis
    Replies: 2
    Last Post: 08-26-2015, 01:11 PM
  3. STX 1100 water leaking into hull. (Not from the hull seal)
    By 1650bullet in forum Kawasaki PWC Performance (2-stroke)
    Replies: 2
    Last Post: 05-07-2015, 07:51 AM
  4. need a 97 ZXI 1100 hull
    By dbell25 in forum Kawasaki Open Discussion
    Replies: 1
    Last Post: 05-10-2013, 05:05 PM
  5. WTB 1100 ZXI Hull
    By 1100zxi in forum Kawasaki How To & FAQs
    Replies: 2
    Last Post: 06-20-2010, 12:33 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •