Results 1 to 3 of 3
  1. #1

    RXP-X 260 MATS Sensor Removal

    I have a stupid question that I can't seem to find the answer for. How do I remove the MATS sensor? The shop manual just says to "disconnect the MATS connector". Is there something I have to press on the connector or do I just pull it off?
    Also, I put a wrench on the sensor to try to remove it and it didn't seem to budge. Does it require quite a bit of force?

    A little background:
    My 2012 rxp-x 260 is throwing a p0127 and going into limp mode. Apparently that's that's a bad reading from the MATS sensor so I want to remove it and check the resistance.
    Or, I have another 2012 rxp-x 260 I could swap it with to see if it's an issue with the actual sensor.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	MATS.jpg 
Views:	22 
Size:	48.3 KB 
ID:	454011  


  2. #2
    Bob 1tommygunner1927's Avatar
    Join Date
    Apr 2007
    Location
    Houston, Texas
    Posts
    8,052
    +1
    1,867
    Replace the green MATS sensor with the blue EXHAUST TEMPERATURE SENSOR P/N 278001016, OR, the black COOLANT TEMPERATURE SENSOR (at the rear of the cylinder head), same P/N 278001016.

    The green MATS sensor does not tolerate moisture well, ie: condensation from the intercooler.

    Using the same view as your pic, push down on the stainless steel clip on the black connector, pull/remove connector. Use a box wrench to remove/install sensor.

  3. +1 by:


  4. #3
    Got it! Thanks for the help!
    It was a lot more obvious once I could see the connector...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. IBR Removal rxp x 260
    By brad2510 in forum 4-Tec Performance
    Replies: 23
    Last Post: 08-16-2019, 12:38 PM
  2. 2013 rxpx-260 intake temp sensor removal problems
    By darwin11 in forum 4-Tec Performance
    Replies: 0
    Last Post: 08-09-2018, 05:45 PM
  3. Replies: 72
    Last Post: 07-05-2016, 05:33 PM
  4. 04 RXP Sensor light Code P1517 Need Help/Advice on Removal Please Read
    By davidrxp in forum Sea Doo Open Discussion
    Replies: 16
    Last Post: 12-03-2013, 08:22 PM
  5. Replies: 16
    Last Post: 08-07-2013, 03:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •