Working on a new to me slt 700 that was non running when I got it. Low compression, weak to no spark. New rings and hone job and compression is back, now working on electrical. Thanks to all the info I found here know the following. It has the update kit, and all the tests I found on here come back as good from the stator and coil. See 8v from the cdi to the stator as well. Did find the flywheel has cut into the green wire, fixed that back up prior testing. On one plug I do get an occasional weak spark but see nothing on the other one, both plugs grounded as same time and tried different plugs as well. At this point leaning towards cdi, but want opinions on if that is the best place to start?

appreciate any advice!