Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1

    Join Date
    Jan 2016
    Location
    Iowa
    Posts
    189
    +1
    3

    RXP 300 Maintenance light reset?

    I have a Sea Doo RXP and was wondering if their is any way to reset the maintenance light? Itís annoying that every time I start it up the wrench light comes on and a message displays for like 10 seconds. Any way to get rid of this?


  2. #2
    This is how I run a jetski shop in the desert nmpeter's Avatar
    Join Date
    May 2008
    Location
    Elephant Butte New Mexico
    Posts
    8,373
    +1
    1,971
    you need to visit your dealer or one of the wonderful independent shops that have invested in the tooling to service late model skis.

    you can actually buy the tool in the GH store.

    It's called a "candoo"

    by the way, I don't reset the maintenance light if the customer cannot prove that the service was actually done by way of receipts for oil and filter

    and then it's a 30 minute labor charge

    tip: buy the tool, it's pretty darn handy and $400 well spent if you value your time and ski

  3. #3
    bill321's Avatar
    Join Date
    Oct 2012
    Location
    Lady Lake, Fl
    Posts
    377
    +1
    56
    The owner's manual that came with my 2019 RXTX on page 60 under " settings" explains how to reset the maintenance reminder...haven't tried it yet but it is in the manual for '19...

  4. #4
    This is how I run a jetski shop in the desert nmpeter's Avatar
    Join Date
    May 2008
    Location
    Elephant Butte New Mexico
    Posts
    8,373
    +1
    1,971
    good to know, previous it required a hookup to the ECU to reset that!

  5. #5
    moparguy's Avatar
    Join Date
    Sep 2016
    Location
    Niagara Falls, Ontario
    Posts
    1,628
    +1
    319
    Quote Originally Posted by bill321 View Post
    The owner's manual that came with my 2019 RXTX on page 60 under " settings" explains how to reset the maintenance reminder...haven't tried it yet but it is in the manual for '19...
    What is the process for a 19?

  6. #6
    This is how I run a jetski shop in the desert nmpeter's Avatar
    Join Date
    May 2008
    Location
    Elephant Butte New Mexico
    Posts
    8,373
    +1
    1,971
    it be true

    I just checked the 2019 owners manual from the seadooo web.

    access the "right arrow menu"



    Maintenance Reset (only if maintenance is required)Using right arrow button, Select RES MAINT and hold OK button to reset maintenance.NOTE:The maintenance reset can only be done within the first 15 seconds of ECM wake-up

  7. #7
    This is how I run a jetski shop in the desert nmpeter's Avatar
    Join Date
    May 2008
    Location
    Elephant Butte New Mexico
    Posts
    8,373
    +1
    1,971
    and as it turns out, there is quite a bit of stuff to consider in the 2019 owners manual

    I cannot say strongly enough that it must be reviewed by owners and techs alike

    key hits

    now running on hose limit appears to be two minutes
    oil that is suggested is 5/40 NOT 10/40
    ANTI-seize now suggested for spark plugs ( even though I posted something recently the NGK plugs don't need that)

    new 2019 owners may want to pay particular attention to what the emission system warranty covers ( 4 years or 250 hours)

    I'm pretty pleased getting into this right now, even though its going to be a while before I see any 2019 models at my shop.

  8. #8
    bwmcbr's Avatar
    Join Date
    Apr 2019
    Location
    BC Canada
    Posts
    32
    +1
    5
    What is the interval for the maintainance light? Mine came on at 46hrs on my 2017..thought it was a strange number, I would have expected it at 50 maybe

  9. #9
    This is how I run a jetski shop in the desert nmpeter's Avatar
    Join Date
    May 2008
    Location
    Elephant Butte New Mexico
    Posts
    8,373
    +1
    1,971
    50 typical, sometimes the ecu and clock time are not identical. nothing to be concerned about, I see that often in the candoo readouts

  10. #10
    Team Bilford's Avatar
    Join Date
    Jul 2009
    Location
    Fort Worth, Texas
    Posts
    657
    +1
    58
    Pete,
    I think the 300s are all 5W-40, at least my 18 is. The manual does say that you can use a 10W-40 motorcycle oil as a substitute. Always thought the different weight was interesting.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How to reset Maintenance light on '18 RXP?
    By BallaRXP in forum 4-Tec Performance
    Replies: 5
    Last Post: 01-19-2019, 03:35 PM
  2. Replies: 14
    Last Post: 04-03-2012, 02:04 PM
  3. RXP-X 2008 Maintenance Light and Unknown issue.
    By rockonup in forum 4-Tec Performance
    Replies: 5
    Last Post: 07-16-2011, 03:38 PM
  4. Resetting maintenance light on RXP
    By Pwgsx in forum 4-Tec Performance
    Replies: 8
    Last Post: 07-26-2010, 10:47 PM
  5. Maintenance Reset Device
    By immred in forum 4-Tec Performance
    Replies: 2
    Last Post: 04-19-2010, 11:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •