Results 1 to 10 of 14
Thread: Need help ASAP!
-
06-08-2007, 05:38 PM #1
- Join Date
- May 2007
- Posts
- 50
Need help ASAP!
Jerry, shibby I need some help.
My buddy is getting towed in right now and heres the scenario.
He was riding and all of a sudden his machine started squealing, not the good kind of whine either, It did this really loud. His RPM's dropped to around 6500 and he has some smoke coming out from the intake area.
He tried starting the machine and the machine will not turn over.
He has for mods:
Riva Intake
Riva trhru hull exhaust
Riva intake grate
14/19R impeller
BOV
Jerry's washers WERE installed last week
Jerry's bearing WERE installed last week
Catch can
Strainer
Stainless steel wearing
solid engine mount
He has done pretty much everything I can think of for bullet proofing your machine and we are wondering what the hell it sould be.
Machine is an 06 with 45hours. Thanks guys.
-
06-08-2007, 08:36 PM #2
- Join Date
- Apr 2007
- Posts
- 67
something in pump? stainless wear ring+wedged rock= squealing noise
-
06-08-2007, 08:45 PM #3
- Join Date
- Jul 2006
- Location
- Beaufort, SC
- Posts
- 592
check the oil?
-
06-08-2007, 10:04 PM #4
- Join Date
- Jan 2006
- Location
- Rydal, Georgia U S A
- Posts
- 3,920
- +1
- 15
SC bearings are gone!
-
06-08-2007, 10:16 PM #5
- Join Date
- May 2007
- Posts
- 50
-
06-08-2007, 11:52 PM #6
If there was some smoke and the engine will not turn over it sounds like the engine locked up. Or hopefully, best case scenario some other bearings locked up like the pump bearings. Pull the pump or the SC and see if the engine will turn over.
-
06-09-2007, 08:19 AM #7
- Join Date
- Jul 2006
- Location
- Ft.Lauderdale
- Posts
- 3,200
-
06-09-2007, 09:08 AM #8
did you visuall check your wear ring to eliminate that?
even with a blown supercharger engine should still be turning over i would think.
sorry to hear about that.hope you get it resoulved.
-
06-09-2007, 10:39 AM #9
Ok well im the one who was getting towed back, what happened was i noticed it started whistle loud and the sound sounded like it was coming from the blower but i could also hear the sound out the exhaust, so i think, anyways before what happened the machine was running great , no power loss, my rpms were 8120-8150 the one time i gave it. Then i noticed the sound getting really loud, i was cruising at about 45mph and all of sudden it just bogged down, and i lost rpms and it stayed running , for a couple of seconds but it didnt sound to healthy so i shut it down. I then tryed to start it back up and it turned over but had a hard time, then it just stopped as if it was jammed!, i brought it home pulled the plugs and there was no sign of metal shavings or anything on the plugs they looked normal, i pulled the dipstick nothing there either. I checked the wear rings its fine. This is the 3rd day with the that wear ring on. If it was the wear ring it would have already jammed but everything was running good then blah!!! shut down. So im kinda thinking it might be the ceramic bearings and toast!!, any other thoughts or ideas would help, but i will keep you guys informed.
-
06-09-2007, 01:25 PM #10
Perhaps the SC bearings welded them selves to the SC shaft?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Need help ASAP
By SeanJ in forum 4-Tec PerformanceReplies: 13Last Post: 05-29-2007, 06:06 PM -
Need Help ASAP
By Yellow04RXP in forum 4-Tec PerformanceReplies: 39Last Post: 05-17-2007, 01:48 PM -
Need help ASAP pro cdi wiring....
By Rodneyae in forum Polaris Open DiscussionReplies: 3Last Post: 05-05-2007, 08:58 PM -
need help asap!!! please
By nonvtecdaturbo in forum Polaris Open DiscussionReplies: 23Last Post: 12-12-2006, 08:11 AM -
Need help ASAP!
By r33pwrd in forum Yamaha PWC Performance (2-stroke)Replies: 10Last Post: 07-05-2006, 07:58 AM
Loose battery cable?
2000 Kawasaki Ultra 150 died and...