Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1

    Join Date
    Mar 2010
    Location
    Long Island, NY
    Posts
    810
    +1
    65

    2011 Kawasaki Ultra 300 Motor Parts

    Parts were pulled from a 2011 Ultra 300 motor that spun the main bearings. I don't know any history on the ski or motor. I picked up the motor completely assembled with intake, exhaust and supercharger all still attached (apparently, hull was cut to remove the motor). I was told that it was running, but it was seized when I got it. When I tore it down, I found the spun bearings. It was also obvious that the motor had previous work done to it.
    There was no water in the oil.

    Please be sure you view the photos and read the descriptions before buying. Make sure you understand the condition of these parts. Some have issues that may affect usability unless repaired.

    I'm looking to make this process as simple as possible, so shipping cost estimates will not be provided until you are ready to buy. Do your own research to get an idea of shipping costs (shipping from 11732). Parts will ship via UPS or USPS, whichever offers the lowest cost. Combined shipping is available.

    If you're interested in any parts, please send a PM with your Paypal e-mail address and zip code. I will send a Paypal invoice for the total.

    **All part from this motor are available and will be listed as time permits. If there's something you want that hasn't been listed, send me a PM.

    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	P5210008.jpg 
Views:	50 
Size:	184.3 KB 
ID:	448937   Click image for larger version. 

Name:	P5210009.jpg 
Views:	45 
Size:	141.8 KB 
ID:	448938   Click image for larger version. 

Name:	P5210010.jpg 
Views:	44 
Size:	185.0 KB 
ID:	448939   Click image for larger version. 

Name:	P5210011.jpg 
Views:	44 
Size:	197.5 KB 
ID:	448940   Click image for larger version. 

Name:	P5210012.jpg 
Views:	48 
Size:	158.1 KB 
ID:	448941  
    Last edited by grumpy_steven; 05-30-2019 at 01:55 PM.


  2. #2

    Join Date
    Mar 2010
    Location
    Long Island, NY
    Posts
    810
    +1
    65
    Crankcase: $200

    Damage to the crankshaft saddles. Otherwise, good condition.

    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	P5290059.jpg 
Views:	30 
Size:	157.3 KB 
ID:	448942   Click image for larger version. 

Name:	P5290060.jpg 
Views:	26 
Size:	124.2 KB 
ID:	448943   Click image for larger version. 

Name:	P5290061.jpg 
Views:	27 
Size:	148.2 KB 
ID:	448944   Click image for larger version. 

Name:	P5290062.jpg 
Views:	29 
Size:	175.5 KB 
ID:	448945   Click image for larger version. 

Name:	P5290063.jpg 
Views:	28 
Size:	152.9 KB 
ID:	448946   Click image for larger version. 

Name:	P5290064.jpg 
Views:	25 
Size:	61.7 KB 
ID:	448947  

    Click image for larger version. 

Name:	P5290065.jpg 
Views:	25 
Size:	46.6 KB 
ID:	448948   Click image for larger version. 

Name:	P5290066.jpg 
Views:	25 
Size:	125.3 KB 
ID:	448949   Click image for larger version. 

Name:	P5290067.jpg 
Views:	25 
Size:	130.9 KB 
ID:	448950   Click image for larger version. 

Name:	P5290068.jpg 
Views:	24 
Size:	127.1 KB 
ID:	448951  
    Last edited by grumpy_steven; 05-30-2019 at 08:26 PM.

  3. #3

    Join Date
    Mar 2010
    Location
    Long Island, NY
    Posts
    810
    +1
    65
    Crankshaft: SOLD

    Looks good, but some of the main journals are not perfectly smooth and will probably need to be ground.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	P6110020.jpg 
Views:	11 
Size:	121.6 KB 
ID:	449501   Click image for larger version. 

Name:	P6110021.jpg 
Views:	14 
Size:	139.3 KB 
ID:	449502   Click image for larger version. 

Name:	P6110022.jpg 
Views:	11 
Size:	94.9 KB 
ID:	449503   Click image for larger version. 

Name:	P6110023.jpg 
Views:	11 
Size:	136.3 KB 
ID:	449504   Click image for larger version. 

Name:	P6110024.jpg 
Views:	12 
Size:	124.5 KB 
ID:	449505   Click image for larger version. 

Name:	P6110025.jpg 
Views:	11 
Size:	134.4 KB 
ID:	449506  

    Click image for larger version. 

Name:	P6110027.jpg 
Views:	12 
Size:	139.9 KB 
ID:	449508   Click image for larger version. 

Name:	P6110026.jpg 
Views:	11 
Size:	126.1 KB 
ID:	449507  
    Last edited by grumpy_steven; 08-20-2019 at 11:48 AM.

  4. #4

    Join Date
    Mar 2010
    Location
    Long Island, NY
    Posts
    810
    +1
    65
    Cylinders: $300

    Cylinder #4 is sleeved

    Some light scoring/wear in all 4 cylinders. Otherwise, good condition.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	P5290052.jpg 
Views:	25 
Size:	156.6 KB 
ID:	448956   Click image for larger version. 

Name:	P5290053.jpg 
Views:	23 
Size:	141.2 KB 
ID:	448957   Click image for larger version. 

Name:	P5290056.jpg 
Views:	25 
Size:	177.0 KB 
ID:	448958   Click image for larger version. 

Name:	P5290057.jpg 
Views:	23 
Size:	141.0 KB 
ID:	448959   Click image for larger version. 

Name:	P5290058.jpg 
Views:	25 
Size:	133.2 KB 
ID:	448960  
    Last edited by grumpy_steven; 08-11-2019 at 10:59 AM.

  5. #5

    Join Date
    Mar 2010
    Location
    Long Island, NY
    Posts
    810
    +1
    65
    Intake and Exhaust Camshafts: $200

    Good condition.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	P5240019.jpg 
Views:	25 
Size:	145.8 KB 
ID:	448961   Click image for larger version. 

Name:	P5240020.jpg 
Views:	25 
Size:	153.6 KB 
ID:	448962   Click image for larger version. 

Name:	P5240021.jpg 
Views:	26 
Size:	118.7 KB 
ID:	448963   Click image for larger version. 

Name:	P5240022.jpg 
Views:	25 
Size:	123.6 KB 
ID:	448964  
    Last edited by grumpy_steven; 05-30-2019 at 08:27 PM.

  6. #6

    Join Date
    Mar 2010
    Location
    Long Island, NY
    Posts
    810
    +1
    65
    Flywheel: $85

    Good condition.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	P5240023.jpg 
Views:	23 
Size:	144.3 KB 
ID:	448967   Click image for larger version. 

Name:	P5240024.jpg 
Views:	24 
Size:	165.0 KB 
ID:	448968   Click image for larger version. 

Name:	P5240025.jpg 
Views:	24 
Size:	93.9 KB 
ID:	448969  

  7. #7

    Join Date
    Mar 2010
    Location
    Long Island, NY
    Posts
    810
    +1
    65
    Exhaust Manifold and Pipe: $300

    Good condition.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	P7120104.jpg 
Views:	10 
Size:	151.7 KB 
ID:	450771   Click image for larger version. 

Name:	P7120098.jpg 
Views:	10 
Size:	174.3 KB 
ID:	450765   Click image for larger version. 

Name:	P7120099.jpg 
Views:	10 
Size:	167.8 KB 
ID:	450766   Click image for larger version. 

Name:	P7120100.jpg 
Views:	10 
Size:	148.4 KB 
ID:	450767   Click image for larger version. 

Name:	P7120101.jpg 
Views:	10 
Size:	160.4 KB 
ID:	450768   Click image for larger version. 

Name:	P7120102.jpg 
Views:	10 
Size:	164.4 KB 
ID:	450769  

    Click image for larger version. 

Name:	P7120103.jpg 
Views:	11 
Size:	166.3 KB 
ID:	450770  
    Last edited by grumpy_steven; 07-12-2019 at 11:02 AM.

  8. #8

    Join Date
    Mar 2010
    Location
    Long Island, NY
    Posts
    810
    +1
    65
    Intake Manifold, Fuel Rail, Fuel Injectors, Sensors: $300

    Throttle body not included (was removed before I got the motor).

    Good condition.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	P7120106.jpg 
Views:	14 
Size:	99.2 KB 
ID:	450773   Click image for larger version. 

Name:	P7120105.jpg 
Views:	14 
Size:	132.2 KB 
ID:	450772   Click image for larger version. 

Name:	P7120107.jpg 
Views:	13 
Size:	127.2 KB 
ID:	450774   Click image for larger version. 

Name:	P7120108.jpg 
Views:	13 
Size:	134.6 KB 
ID:	450775  

  9. #9

    Need supercharger.

    Quote Originally Posted by grumpy_steven View Post
    Parts were pulled from a 2011 Ultra 300 motor that spun the main bearings. I don't know any history on the ski or motor. I picked up the motor completely assembled with intake, exhaust and supercharger all still attached (apparently, hull was cut to remove the motor). I was told that it was running, but it was seized when I got it. When I tore it down, I found the spun bearings. It was also obvious that the motor had previous work done to it.
    There was no water in the oil.

    Please be sure you view the photos and read the descriptions before buying. Make sure you understand the condition of these parts. Some have issues that may affect usability unless repaired.

    I'm looking to make this process as simple as possible, so shipping cost estimates will not be provided until you are ready to buy. Do your own research to get an idea of shipping costs (shipping from 11732). Parts will ship via UPS or USPS, whichever offers the lowest cost. Combined shipping is available.

    If you're interested in any parts, please send a PM with your Paypal e-mail address and zip code. I will send a Paypal invoice for the total.

    **All part from this motor are available and will be listed as time permits. If there's something you want that hasn't been listed, send me a PM.

    You have for sales? And price?

  10. #10
    rrt898's Avatar
    Join Date
    Jul 2011
    Location
    Northern New Jersey
    Posts
    48
    +1
    1
    I know its an older post but; Do you still have the head assembly?

    Thanks for the time

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS - Parts 2011 kawasaki ultra 300x problems may be selling parts or whole thing
    By buckie in forum Kawasaki Classifieds
    Replies: 7
    Last Post: 05-18-2018, 10:57 AM
  2. kawasaki ultra 300 x 2011 com defeito
    By frade in forum Kawasaki Open Discussion
    Replies: 0
    Last Post: 11-26-2017, 08:42 AM
  3. Replies: 0
    Last Post: 09-16-2016, 09:59 PM
  4. FS 2011 kawasaki ultra 300. Complete jetpump
    By STEVE PWC in forum Kawasaki Classifieds
    Replies: 5
    Last Post: 09-24-2013, 09:40 AM
  5. FS 2011 Kawasaki Ultra 300x with some extra parts
    By OZFXSHO in forum Kawasaki Classifieds
    Replies: 0
    Last Post: 04-21-2012, 06:38 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •