Results 1 to 9 of 9
Thread: only pushing 8020rpm??
-
06-06-2007, 07:06 PM #1
- Join Date
- Mar 2007
- Posts
- 20
only pushing 8020rpm??
Hey guys quick question for you on my 06 rxp.. i know its still very new because it only has eight hours on it but in the best lake conditions possible the ski will only hit 8020 rpm and the speedomoter wont even think about going over 60mph.. any thoughts would be greatly appreciated.
Thanx
-
06-06-2007, 07:15 PM #2
-
06-06-2007, 07:23 PM #3
I wish mine was turning 8020 rpm's. I have 10hrs on mine and spins 7850 max and dose 68.3 mph on the gps. Im waiting on the AMS oil so I can do the oil change on it and see if it helps it rev higher.
-
06-06-2007, 09:04 PM #4
those are pretty good numbers. My stage 1 is turning 8050-8100.
-
06-06-2007, 09:14 PM #5
-
06-06-2007, 09:47 PM #6
- Join Date
- Mar 2007
- Posts
- 20
Yeah its weird my ski in perfect conditions will hit 8020 for the rpms and the speedomoter will show 60mph but it wont go over that? Is something wrong with the speedomoter or is it something else?
-
06-06-2007, 09:50 PM #7
-
06-06-2007, 09:57 PM #8
- Join Date
- Mar 2007
- Posts
- 20
what would be a good all around gps to buy? I have been looking for one but not sure what to get.
-
06-06-2007, 10:14 PM #9
Something cheap that is a Garmin Etrex. I have one and like it. It gets the job done.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Polaris freedom only sparks when you push lanyard switch
By jasonsmithftw in forum Polaris Open DiscussionReplies: 11Last Post: 09-15-2015, 12:40 PM -
polaris freedom 2002 will only fire with bilge button pushed
By kevingrove301 in forum Polaris How To & FAQsReplies: 9Last Post: 08-05-2014, 06:38 PM -
2002 freedom 700 spark only with bilge switch pushed
By KRR in forum Polaris Open DiscussionReplies: 1Last Post: 06-04-2013, 08:50 PM -
Water filled in the hull, RXP only 10hrs...
By omelfata in forum Sea Doo Open DiscussionReplies: 4Last Post: 08-15-2005, 02:39 PM -
why "only" 69.22 MPH?
By Ed in forum Sea Doo Open DiscussionReplies: 4Last Post: 05-29-2005, 11:00 PM
My owners manual ask for pump bearings and seals inspection as part of the...
How to inspect pump seal/bearings...