Results 1 to 3 of 3
  1. #1

    Xlt1200 Mr-1 conversion

    After years of research and several blown 1200pv motors I've finally started my Mr-1 conversion and chunked the 1200 in the scrap pile. This is a 05 Yamaha Xlt1200 the donor is a 05 Yamaha Fxho with only 31.7hrs I picked up from a local auction for $2500. So far I have installed the Fxho fuel tank, Fxho midwall bearing/coupler, and mocked up the Fxho seat plate to be able to easily access the rear of the motor and the coupler.

    Everything I've read up until now has said its necessary to clearance to starboard stringer to make room for the ho exhaust. But during mock up I found the exhaust has a little over an inch and a half of clearance which I would think should be more than enough without cutting it. So I believe I'm just going to bolt the engine right in as it is and see how it turns out.

    Next up I will be installing the Fxho transom plate/pump, Fxho cables/hoses, full oil change on the motor, and install the motor. Here are pictures of the donor and my current progress.Click image for larger version. 

Name:	20190401_150228.jpg 
Views:	53 
Size:	124.4 KB 
ID:	446524Click image for larger version. 

Name:	20190401_150240.jpg 
Views:	52 
Size:	109.6 KB 
ID:	446525Click image for larger version. 

Name:	20190401_150235.jpg 
Views:	50 
Size:	148.4 KB 
ID:	446526Click image for larger version. 

Name:	20190401_150059.jpg 
Views:	50 
Size:	88.0 KB 
ID:	446527Click image for larger version. 

Name:	20190401_124918.jpg 
Views:	51 
Size:	79.1 KB 
ID:	446528Click image for larger version. 

Name:	20190401_124758.jpg 
Views:	48 
Size:	90.5 KB 
ID:	446529Click image for larger version. 

Name:	20190401_124746.jpg 
Views:	48 
Size:	75.2 KB 
ID:	446530Click image for larger version. 

Name:	0ae205ec-61a9-4178-8281-189074f2b2a0.JPG 
Views:	52 
Size:	60.6 KB 
ID:	446531Click image for larger version. 

Name:	1bbdcbea-8571-4e08-9c46-fc4826fff1b0.JPG 
Views:	52 
Size:	39.9 KB 
ID:	446532Click image for larger version. 

Name:	20180904_143102.jpg 
Views:	51 
Size:	90.6 KB 
ID:	446533


  2. #2
    This is the ski I'm performing the conversion on. Spent a lot of time and money on customizing it before the last 1200 blew so I couldn't help but stick with it and just do the conversion instead of replacing the ski.
    Click image for larger version. 

Name:	FB_IMG_1530565285554.jpg 
Views:	61 
Size:	111.4 KB 
ID:	446535Click image for larger version. 

Name:	20180702_152410.jpg 
Views:	55 
Size:	68.9 KB 
ID:	446534


  3. #3
    raiderteen's Avatar
    Join Date
    Nov 2007
    Location
    Marion, Illinois
    Posts
    360
    +1
    8
    Nice looking ski. Could you get a measurement of the complete MR-1 from coupler to furthest forward point? Looks like you've made good progress already. Keep it up!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB - Parts XLT1200 hood hinge, XLT1200 OEM cover
    By nunnink23 in forum Yamaha Classifieds
    Replies: 4
    Last Post: 03-29-2013, 09:22 AM
  2. 03 XLT1200 FX140 conversion
    By WS6mikey in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 10-16-2012, 01:52 PM
  3. xlt1200 fxho mr-1 conversion
    By slociviccoupe in forum Conversion PWC Performance Skis
    Replies: 23
    Last Post: 04-10-2012, 08:22 PM
  4. xlt1200 4 stroke conversion.... midwall needed?
    By slociviccoupe in forum Yamaha Projects & Build Threads
    Replies: 6
    Last Post: 09-30-2011, 07:46 PM
  5. FS...GAS Valve Conversion Kit for GP1200r/XLT1200/XL1200
    By need4pwr in forum Yamaha Classifieds
    Replies: 6
    Last Post: 08-14-2008, 08:30 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •