Page 6 of 7 FirstFirst ... 4567 LastLast
Results 51 to 60 of 61
  1. #51
    mittens's Avatar
    Join Date
    Mar 2018
    Location
    Huntsville, AL
    Posts
    709
    +1
    69
    Mine was separated as well. rubber from the outside of the housing.

  2. #52
    Can I change the intermediate housing by just pulling the engine forward and up? I’m already at that stage and it’s not budging, do I need to take it apart from the back too?

  3. #53
    Hurricane1000's Avatar
    Join Date
    Oct 2005
    Location
    Gulf of Mexico
    Posts
    1,229
    +1
    126
    Yes....absolutely can do it that way. I did!

  4. #54
    Why would it be stuck on? I got a ski that’s been sitting in salt water and probably had this leak for a while the 3 housing bolts snapped off super brittle..can take pics later

  5. #55
    mittens's Avatar
    Join Date
    Mar 2018
    Location
    Huntsville, AL
    Posts
    709
    +1
    69
    I did not remove motor. took out motor mounts bolts and shims, marked where they go, and then lifted motor and slide forward.

    did what I needed, and then slid back, put shims back and torqued back down.

  6. #56
    That’s what I meant I slid motor forward, now do I need to take the coupler off first ? Or do they come off together with the housing, already removed the 3 bolts holding housing to the wall.. just pry it off?


  7. #57
    mittens's Avatar
    Join Date
    Mar 2018
    Location
    Huntsville, AL
    Posts
    709
    +1
    69
    The motor side will have the metal coupler.

    the mid bearing housing, and Coupler will come off together. probably stuck to the wall.

  8. #58
    Got it off at last, ordered the last fully assembled housing they had

  9. #59
    mittens's Avatar
    Join Date
    Mar 2018
    Location
    Huntsville, AL
    Posts
    709
    +1
    69
    Good deal, hopw it fixes your leak. with a good/new IM, and a re-sealed transom. should be water tight.

  10. #60

    Leaking intermediate housing...questions.

    Just had my 15 fz replaced fixed the water leak (gallons of water after a ride) also in the water you could hear it leaking. I have 350 hrs

Page 6 of 7 FirstFirst ... 4567 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Intermediate housing / Mid shaft leaking *Pictures*
    By oldphones in forum Yamaha PWC Performance (4-stroke)
    Replies: 11
    Last Post: 08-11-2015, 02:07 PM
  2. Intermediate housing
    By Mike1646 in forum Yamaha PWC Performance (4-stroke)
    Replies: 39
    Last Post: 05-03-2012, 09:33 AM
  3. intermediate housing help
    By hitman in forum Yamaha PWC Performance (4-stroke)
    Replies: 5
    Last Post: 04-26-2011, 03:50 PM
  4. intermediate housing
    By tubetent in forum Yamaha How To & FAQs
    Replies: 6
    Last Post: 02-25-2009, 10:29 AM
  5. Intermediate Housing
    By JKR1300 in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 10-30-2006, 05:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •