Skis are as per the spec in the signature and have the Riva Stage 2 8500 tune on them both/

Both skis have just had their cranks replaced as both had the leaking/corrosion problem, luckily this all went through on warranty as the bill for this is HUGE! In my opinion it should have been a recall.

Took them out on the water recently to test them and the 2UP wont rev more than 7600rpm and the 3UP wont rev more than 7800rpm. It was 32 degrees and they were tested at sea level in salt water.

Previous to the crank replacement both skis would rev around 8200rpm.

Checked for error codes when I got back, nothing found.

Any ideas why the RPMs would be so low?