Results 1 to 8 of 8
  1. #1

    Join Date
    Aug 2012
    Location
    christchurch, new zealand
    Posts
    62

    Polaris, no spark, no fuel display doesn't show up while cranking

    Long long tym project, I get 12v at the starter solinoid but doesn't crank, put the earth black/white wire onto earth and cranks. (bipass lr modeul)

    No fuel pressure while cranking but I can hot wire it and it works

    No spark

    The display doesn't wake up or show rpm while cranking.

    Emm just back from repair and works in another ski.

    Please help


  2. #2
    MSX 150 guy lives on Mr. GP1800's Avatar
    Join Date
    Jun 2010
    Location
    Milwaukee WI
    Posts
    17,550
    +1
    1,502
    A few things. Sounds like the display may be locked. That could keep it from cranking.

    If the display doesnít wake up and nothing else seems to wake up Iíd suspect the cps. Check that. Without a signal from that nothing else will wake up including the emm.

  3. #3

    Join Date
    Aug 2012
    Location
    christchurch, new zealand
    Posts
    62
    The display has unlocked time and fuel and oil levels, that's it

  4. #4

    Join Date
    Aug 2012
    Location
    christchurch, new zealand
    Posts
    62
    I'd forgotten to hook up the bilge pump, still won't turn over but the forward reverse motor working now, I think it's something real simple but not sure to start looking.

  5. #5

    Join Date
    Aug 2012
    Location
    christchurch, new zealand
    Posts
    62
    The reverse motor only works with bilge pump on also, any ideas on what has caused this? It's all goin thru the LR moduel again also, but if I take the black/white wire spade connector off and put it to earth (black) it cranks but no fuel or spark

  6. #6
    MSX 150 guy lives on Mr. GP1800's Avatar
    Join Date
    Jun 2010
    Location
    Milwaukee WI
    Posts
    17,550
    +1
    1,502
    See my post above

  7. #7

    Join Date
    Aug 2012
    Location
    christchurch, new zealand
    Posts
    62
    Pin 1 & 12 0.7 ohm pin 2 & 11 0.7 ohm

  8. #8

    Join Date
    Aug 2012
    Location
    christchurch, new zealand
    Posts
    62
    No power feed to emm, tan/orange has 12.7v thou, the wiring diagram shows pin 1&8 as red/purple but they black and black yellow

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How come my avatar pic doesn't show?
    By dpracing in forum 4-Tec Performance
    Replies: 3
    Last Post: 06-10-2013, 07:01 PM
  2. Polaris Freedom 2004 - Fuel gage-display not fuctioning
    By commons71 in forum Polaris Open Discussion
    Replies: 12
    Last Post: 10-29-2012, 04:56 PM
  3. Display screen doesn't turn off
    By jojostarbux in forum Polaris How To & FAQs
    Replies: 5
    Last Post: 06-13-2012, 09:54 AM
  4. 2003 MSX 140 - no spark, no display response when cranking
    By 1100zxi in forum Polaris Open Discussion
    Replies: 5
    Last Post: 06-28-2011, 10:47 AM
  5. Display doesn't turn on. gp800
    By desertmariner in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 10-21-2010, 07:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •