Results 1 to 10 of 21
Thread: Raider (Break) IN
-
06-05-2007, 09:20 AM #1
Raider (Break) IN
..I have been absent for a while just working on my ski and testing, TIM JUDGE.....is the real deal
, I dont even have my JetWorks on yet , and i cant explain how hard this Raider pulls out of the hole....I only hit it hard (ONE) time , after the all afternoon break in.........I ran 6850 across the chop..
, it was still pulling when I let off......I dont really try to top out on the chop....then ..DISASTER....
."duhh.duhhh..duhhh..duhh...", it was running on 2 cylinders.pulled to the shore. and checked what I could, but didnt bring the compression tester, so after 6 hours in the sun and fun we went home. LONGEST RIDE IN A LONG TIME....when I checked the compression , I HAD 155....155..( 0 )......you dont know how much I wanted the guage to be wrong,or the valve core messed up !!!, so after a LOT of "bad words".I pulled the head and .....ALL WAS PERFECT, the cylinders were perfect ,the pistons perfect, no scratches...then I looked at the head and found a "HOLE"..in the dome !!!!
, I was so relieved it wasnt something else....soooooooooooo..what happened is , the Triton 1 piece head comes with domes that make it around 200 psi, so to get it to work, I had to get the dome cut out, .well the dome was cut so thin and I believe the machinist ,hit the edge, too much causing the "CAST" alluminum head to punch a really small hole in one spot..... and the pressure did the rest, so I am running a milled stock head ,squish is real close to being right and the compression is good also, this Raider makes you wonder if there is an end to the throttle..it blows my mind .I am going today after work on ripple water to GPS... (THIS IS GOING TO BE A ...REALLY..LONG DAY)
-
06-05-2007, 09:26 AM #2
Wow, I would have had a stroke. I am glad everything is O.K.!! Your going to like seeing that GPS click off 70+++.
-
06-05-2007, 09:27 AM #3
Sounds wicked whats comp now with the stock head.
My pro tec head would work well on there.
Cant wait for your post later.
FS
-
06-05-2007, 10:25 AM #4
I almost had one.......
.Scott.....it is a perfect 150.150.150
-
06-05-2007, 10:31 AM #5
-
06-05-2007, 10:59 AM #6
You know what is funny ???, I had more fun just riding around on my ski....after the winter and last year being sick so much, I look forward to every time I am out.....but that stocker head sure doesnt look like that block of alluminum....
-
06-05-2007, 11:13 AM #7
That head was pretty, but now you have a sleeper look to it and there is nothing wrong with that.
-
06-05-2007, 12:29 PM #8
-
06-05-2007, 12:50 PM #9
I like it. You may be able to call it 97GPSLEEPERKILLER!!!
-
06-05-2007, 12:53 PM #10
I can't wait to see that crazy raider run like a pissed off paper plate !
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
new stage 2 break in time
By rrrxxxppp in forum 4-Tec PerformanceReplies: 13Last Post: 06-24-2005, 01:29 PM -
Got past my break in and this is what I got!
By Water4fire in forum 4-Tec PerformanceReplies: 12Last Post: 05-20-2005, 07:22 AM -
BREAK IN SUCKS!
By BLOWNRXP in forum Sea Doo Open DiscussionReplies: 5Last Post: 05-18-2005, 10:15 PM -
New Rxp break-in procedure
By SUPERBEAST in forum Sea Doo Open DiscussionReplies: 1Last Post: 05-09-2005, 05:53 AM -
Break in period and Noise at 5000rpms on 05 GTX Limited
By spc9669 in forum 4-Tec PerformanceReplies: 4Last Post: 05-08-2005, 11:30 AM
Read post number 2 again. Best info. RR
2008 Seadoo RXP-X 255 mods question