Depth finder with standalone ecu?

[ptscon]

Does the depth finder module depend in any way on stock ECU being present? I'm guessing it just communicates with the cluster but want to make sure.

[1tommygunner1927]

Depth finder works fine with MoTeC M130. Same for the ski module.

[ptscon]

Depth finder works fine with MoTeC M130. Same for the ski module.

Thanks

[EVN81]

Depth finder works fine with MoTeC M130. Same for the ski module.

You have the ski module working with the M130?
Mine disappeared from cluster when swapping ECU’s

Which made sense I thought.

Deptfinder appeared on the cluster but don’t have the hardware installed.

[1tommygunner1927]

You have the ski module working with the M130?
Mine disappeared from cluster when swapping ECU’s

Which made sense I thought.

Deptfinder appeared on the cluster but don’t have the hardware installed.

Yeah, I think so.....its plugged in to the harness next to the battery, is displayed in the dash when scrolling thur the menu, but I never had the need to actually use it.

Update: Well, I can set the speed at different intervals on the dash but upon hitting the set button dash reads: "function cannot be engaged".