Results 1 to 6 of 6
Thread: ECU Piggyback
-
11-01-2018, 08:02 PM #1
ECU Piggyback
Has anybody ever tried using a piggyback module, or power commander 3 on the R12X or F12X? Supposedly the ECU From the Honda Blackbird 1100 are almost "identical". Anybody have any knowledge or input?
Thanks
-
03-23-2019, 07:42 PM #2
- Join Date
- Sep 2014
- Location
- wasaga beach, ontario
- Posts
- 27
- +1
- 2
You should be able to use any Power Commander 5 from a 4 cylinder motor and then be able to change fueling. It wont be plug and play. You will have to splice the power and ground wires and then splice the injector wires into the PCV and then into injectors.
We did a snowmobile turbo project this winter similar to this.
-
04-01-2019, 10:12 PM #3
-
04-21-2019, 12:37 PM #4
- Join Date
- Sep 2014
- Location
- wasaga beach, ontario
- Posts
- 27
- +1
- 2
\
No problem. And i agree about the mods, its cheaper and easier to buy a different machine vs trying to do anything to these. If you do decide to use a PCV for fueling modifications, the tech support at Dynojet is actually pretty good. They helped me hack together 2 power commanders this winter to run secondary injectors on a turbo snowmobile project. You could do the same really for one of these machines, but I don't know if it would be worth the trouble without raising the rev limiter. It would be very simple to add 1 fuel injector and have it only turn on above 10 or 12 psi, but then again, I am not sure this would be worth it without being able to raise the rev limiter.
-
+1 by:
-
04-21-2019, 11:17 PM #5
I've heard great things about power commender's customer service. However, my ski has just about every (worth while) modification out there, and its great for what it is. Think it just needs to be left alone at this point. Its relatively fast and damn reliable. If I want more speed down the road I'll just look for a unicorn F15X or get a waverunner svho.
-
04-25-2019, 07:44 PM #6
- Join Date
- Sep 2014
- Location
- wasaga beach, ontario
- Posts
- 27
- +1
- 2
Ya, thats the way to do it. Its a shame there's not really any mods for the F15X either anymore, I picked up a mint one with only 40 hours last year. I plan on keeping it for a while.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
How To: Install RR ECU after the knock sensor update 04 RXP
By Green Hulk in forum Sea Doo How To & FAQsReplies: 15Last Post: 06-14-2008, 12:13 PM -
Aftermarket ECU or Piggyback EFI 1300R
By Chrisrokc in forum Yamaha PWC Performance (2-stroke)Replies: 14Last Post: 04-25-2007, 09:38 AM -
rr ecu or piggyback
By jeremy in forum 4-Tec PerformanceReplies: 12Last Post: 11-04-2005, 11:34 AM -
re program stock ecu
By INDY27 in forum 4-Tec PerformanceReplies: 9Last Post: 05-09-2005, 12:48 PM -
Is anyone going to try the new ECU??? I may, My options
By Jrsrxp in forum 4-Tec PerformanceReplies: 8Last Post: 05-05-2005, 09:36 PM
I loosened the ride plate bolts and it made enough clearance to slide out...
FX HO Impeller Project &...