Results 1 to 6 of 6

Thread: Yamaha vx swap

  1. #1

    Yamaha vx swap

    Hey guys can anybody give me an advise?
    I have a clean running yamaha vx110,and recently I found a new vx cruiser hull for sale without engine steering wheel and other stuff so just the hull.
    My question is can I swap everything from vx to cruiser plug&play?

  2. #2

    Join Date
    Aug 2008
    Dalton, Ga.
    yes..but why?
    why not Just buy a cruiser seat?

  3. #3
    Because my vx hull is beaten up and I want a change,and I found a new cruiser hull for cheap.
    So everything fits?

  4. #4
    dixon0001's Avatar
    Join Date
    Aug 2008
    north east uk (hartlepool)
    What are years of both hulls ? If they both run mr1 then yes but cruiser functions won't work still

  5. #5
    Vx is 2009,and cruiser is 2017 and I dont know is he running on mr1,for me is enough vx functions on cruiser if possible

  6. #6
    TimeBandit's Avatar
    Join Date
    Jun 2016
    Tampa Bay
    Good-news, generally Yamaha doesn't change much with the internal geometry (i.e. engine mount and drive shaft offsets) between hulls. However, you could run into small things like the hull bumper pads underneath the motor, slight re-shimming alignment issues, intake airbox routing, exhaust routing, etc... that might not otherwise qualify as plug-n-play per-say. I'd start by closely comparing the online OEM parts fiche diagrams and comparing shared part numbers between these two models as homework.

    FWIW, I have successfully hull-swapped (linky) a 2012 VXR into a yester-year 2005 FX HO (basically re-powering my old FX HO mr1 with the newer 1.8L motor). Engine mounts lined-up perfectly considering the 7 year gap and being two totally different engines. Thus "hull-swap" is literally the game here, as I had to move EVERYTHING from that VXR (electronic harness & box, hull pads, engine mounts, waterlock, gauges, jet pump stator/impeller/shaft, and IB mid-shaft, fuel-pump list goes on ...) into my FX hull. The only things I didn't swap was the fuel tank, steering assembly.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Lifespan Of 4 Stroke Yamaha Vx Sport?
    By stoyan79 in forum Yamaha PWC Performance (4-stroke)
    Replies: 10
    Last Post: 08-05-2014, 02:00 PM
  2. Replies: 1
    Last Post: 06-02-2014, 10:27 AM
  3. 05 Yamaha vx 110 recalls?
    By terkkata in forum Yamaha Open Discussion
    Replies: 3
    Last Post: 03-03-2011, 11:07 PM
  4. 2008 GTI 155 HP or Yamaha VX Deluxe
    By faxon in forum Sea Doo Open Discussion
    Replies: 10
    Last Post: 10-21-2007, 04:22 PM
  5. Yamaha VX Deluxe vs. Sea Doo GTI 155hp
    By faxon in forum Yamaha Open Discussion
    Replies: 1
    Last Post: 10-17-2007, 06:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts