Results 1 to 3 of 3
  1. #1
    Every adventure comes to an end........ Not Today! wreckingball's Avatar
    Join Date
    Sep 2009
    Location
    San Diego, California, United States
    Posts
    1,350
    +1
    2

    Exclamation GP1300R Wonít Start unless fuel pored into cyl

    So my ski has been down for a few years. Divorce, moving and life has gotten in the way of putting the motor back together... well, today was the day to put the beast back together. Basically a new motor. Only the performance parts carried onto a new case and one new head had to be ported to match the other two. So here begins my problem. Every thing assembled and the motor cranks, but it doesnít fire off. I check and I have spark. I pull the fuel line and it sprays out fuel from the pressure. So I put gas in each spark plug hole then put the plugs in. Fires up and runs until that fuel is burned. So I thought maybe my fuel controller might have quit working while the ski was sitting. Still nothing. So I checked the throttle cable.. has slack and is in a full off when not pulled to accelerate. So somewhere between the fuel tank and the injectors is my problem. Iím 6/7 hours into this project today hoping to have the ski going for Labor Day tomorrow. Any suggestions or anyone whose had this problem? Itís 1am. Iím done for tonight 😔


  2. #2
    Every adventure comes to an end........ Not Today! wreckingball's Avatar
    Join Date
    Sep 2009
    Location
    San Diego, California, United States
    Posts
    1,350
    +1
    2
    Is anyone awake yet who has $0.02!

  3. #3
    Every adventure comes to an end........ Not Today! wreckingball's Avatar
    Join Date
    Sep 2009
    Location
    San Diego, California, United States
    Posts
    1,350
    +1
    2
    Just swapped in my old injectors and now I’m getting 2 of 3 inj spraying. The reason I pulled them was because one cyl had burned down on this set... hence swapping out to another set. But the set I put in is completely clogged! So how do I unclog a fuel injector? Just need one to make it for the day.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Polaris SL 750 Wont start or rund on 2 cyls but not 3?
    By ifixem in forum Polaris Open Discussion
    Replies: 12
    Last Post: 06-15-2012, 07:32 AM
  2. 2007 GP1300R wont start - no spark and noise from electric box.
    By Davryx in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 09-13-2011, 09:39 AM
  3. 2005 GP1300R wont start
    By jadamoi0619 in forum Yamaha PWC Performance (2-stroke)
    Replies: 6
    Last Post: 09-12-2010, 07:16 AM
  4. Won't start unless fuel poured into carb !
    By jdwcs in forum Yamaha How To & FAQs
    Replies: 3
    Last Post: 06-13-2010, 11:31 AM
  5. 2005 GP1300R wont start (no spark) - Need help
    By arielsdv in forum Yamaha PWC Performance (2-stroke)
    Replies: 43
    Last Post: 04-25-2009, 03:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •