Results 1 to 10 of 12
-
05-23-2005, 12:35 PM #1
- Join Date
- Apr 2005
- Location
- Augusta GA
- Posts
- 720
Are these the hoses i am to put the clamps on
Are these the hoses Iam to put the clamps on to prevent the water pressure from kicking them off of the ones in Yellow??
-
05-23-2005, 12:35 PM #2
- Join Date
- Apr 2005
- Location
- Augusta GA
- Posts
- 720
and this one
-
05-23-2005, 01:14 PM #3
-
05-23-2005, 04:24 PM #4
I believe there is a total of 12 zip ties that need to be replaced with hose clamps.
-
05-23-2005, 04:30 PM #5
Why do those hoses need clamps? I have a bunch of crap in one of those hoses and it is a beotch to get those hoses off even without the zip ties.
-
05-23-2005, 04:43 PM #6
Franko, do yourself a favor and pull the hoses apart and clean them. I had to do that as well. Replace the zip ties with little hose clamps like i did here.
Many RXP's have sunk because one of those little hoses came loose.
-
05-23-2005, 04:49 PM #7
Thanks Hulk. Man, that plumbing kit looks bad ass. Where did you get that intercooler? How does it compare to the RR intercooler?
-
05-23-2005, 04:52 PM #8
that was the spearco intercooler that Turbo Tech sent me for testing. It's a very nice setup and installs VERY easily, but the results were about the same maybe a little less than the RR unit so i just kept my RR unit.
-
05-23-2005, 04:52 PM #9
Hulk, nevermind. I remember you tried Turbo Tech's IC. I guess that is an old pic, right?
-
05-23-2005, 05:54 PM #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Are these the Good SeaDoo Exhaust Valves??
By YamahaManny in forum 4-Tec PerformanceReplies: 26Last Post: 10-14-2013, 09:28 AM -
Are PWC-only Poker Runs worthwhile to put on?
By baxt3r in forum Open DiscussionReplies: 9Last Post: 06-29-2009, 06:58 PM -
Time to put some lipstick on this pig...
By mjh3ides in forum Yamaha PWC Performance (4-stroke)Replies: 14Last Post: 06-12-2009, 06:36 AM -
Are these the correct reeds? Pics inside
By ryanbgb22 in forum Polaris Open DiscussionReplies: 8Last Post: 05-23-2008, 08:52 PM -
Any one to put "Magic Touch" on Impeller?
By Alex13 in forum 4-Tec PerformanceReplies: 7Last Post: 07-25-2006, 10:11 AM
You'll end up going slower at top end with higher rpms.
2017 rxt 300 stage 2 strange...