pissers

[polarisman01]

im wantin to get ride of the water rail and add the 3 pissers, the only thing i dont no is what to do with the hose that is on the water rail?

[polarisman01]

after lookin around found some info on the pissers but can find what do to with the hose that is on the coolin bar. do i just plug it up or what?

[beerdart]

Just cap it at the outlet.

[polarisman01]

so just take the hose out and put a cap on it on the outlet thats under the pump housing, or just cut the hose back some and plug it.

[beerdart]

where does the hose exit the hull?
What SkI are we talking about?

[polarisman01]

my 01 1200 pro it exits at the back of the hull, on top of the stator.

[S12L00X]

I have been looking for pissers for mine. Where did you find them?

[slx1200]

i got mine from www.parkeryamaha.com

[TxVirageTx]

Just Remove The Outlet Hose,get A Heater Bypass Cap At An Auto Store And Put It On The White Fitting Inside The Hull,watch Your Piston Wash Afterwards,by Changing The Waterflow Rates You May Alter What The Jetting Requirements Are,also The Pto Cyl Will Run Way Cooler With The Extra Water It Gets From The External Water Line It Has,could Install A Shutoff Valve On That Line But Would Definately Have To Watch The Piston Wash

[slx1200]

im pretty sure riva racing has them too